Quote:
Originally Posted by sicrx
K good I was just making sure of all this info, so I do need an sr20 clutch kit , wat about wire harness and ka24de tranny can I use that to plug n play or do I need sr harness and tranny
|
You need a usdm 200sx harness and JDM sr harness to splice together. Cut right at the ecu plug on both and match up colors. Easy as pie, I promise.
You can use the KA flywheel and tranny. Only 2 bolt holes are gonna line up. Tighten them to 2x factory spec. 200ft/lbs iirc. Make sure you get a rb20 starter or it's never gonna work tho.
Good luck.
02-01-2014, 05:38 PM
Threaded Mode