momo hub question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

clean · 09-24-2004, 05:36 PM

you probaly bolted the center nut down too tight. anyway just go to pep boys and rent a wheel puller, thats what i did to get the stock wheel off. all it is is a metal bar w/ a big bolt in the center that sits on the spinlde and you just crank it down. i made my own out of a hockey stick peice and a big bolt and nut and put it under the hub where the wheel bolts on. it bent the metal but i just flipped the homemade puller after i got the hub off to bend it back

09-24-2004, 05:36 PM	#1
clean Zilvia Junkie Join Date: Feb 2003 Location: nowhere Age: 44 Posts: 473 Trader Rating: (0) Feedback Score: 0 reviews	you probaly bolted the center nut down too tight. anyway just go to pep boys and rent a wheel puller, thats what i did to get the stock wheel off. all it is is a metal bar w/ a big bolt in the center that sits on the spinlde and you just crank it down. i made my own out of a hockey stick peice and a big bolt and nut and put it under the hub where the wheel bolts on. it bent the metal but i just flipped the homemade puller after i got the hub off to bend it back