Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-29-2014, 09:38 AM   #19
chazten
 
Join Date: Dec 2012
Location: central florida
Posts: 35
Trader Rating: (0)
chazten is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by kruked View Post
I'm actually one of those douche bags that likes to read...thoroughly. I've read every post contained in this thread.
My ka once had the same exact symptoms. It was the ECU, I knew this because I shorted it out, several times. It finally told me, "fuck you!" Once it wouldn't shut off when I turned it off by the key, I replaced the ECU.

Problem was then solved, along w/ several other problems.
Im back, so i found an ecu on craiglist, the front sticker that says whether it is an e5, 62, or 63 on it got ripped off, the guy knew it came out of his s13 sr20 so i figured as long as its not a notchtop it should be interchangable besides o2 sensors. so i got it and plugged it in and yes! she started up, but only for a moment until it sputtered to a stall after 2-3 seconds. so i started it again but this time gave it gas and it wasnt a clean rev, it was full of break ups and wouldnt rev high, just sputter and i let off at all it would die. So i slept on it and came back today and started it up with the maf unplugged. This time it ran a little smoother, idled smooth but would still sputter under any type of throttle(all of this is at neutral under no load) so i plugged the maf back in and started it and it ran worse like the day before. So i unplugged it, started it, let it idle then i went into the engine bay and plugged in the maf with the car running and it immediately died. what does this mean? is this ecu not compatible? is the maf broken? it never had this problem before, and my previous ecu was e5 and this one has an led in it so i know its not an e5. HELP!!
chazten is offline   Reply With Quote
 

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 06:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net