rb25 wiring... I think im good but... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

70ina30 · 07-02-2014, 02:24 PM

I did follow the rb25 pinout and swapped all of the pins on the f3/m63 plug.
However there are about 12 wires leftover.
Done for an rb25 series 1 into 240sx s14
Some are ground yes, but what about....
Orange /white stripe
Pink
Yellow/ purple
Brown/blue
Orange
Brown/yellow
Green/black
Green/pink

Do these now get routed to the smaller plugs next to the f3 plug in the kick panel

70ina30 · 07-02-2014, 05:29 PM

Ok I found the remaining wires were ground
Abs lsd
Knock sensor
Check signal on diagnostics

Do these stay free or do they get wired up

07-02-2014, 02:24 PM	#1
70ina30 Leaky Injector Join Date: Jan 2008 Location: San Antonio TX Age: 40 Posts: 97 Trader Rating: (1) Feedback Score: 1 reviews	rb25 wiring... I think im good but... I did follow the rb25 pinout and swapped all of the pins on the f3/m63 plug. However there are about 12 wires leftover. Done for an rb25 series 1 into 240sx s14 Some are ground yes, but what about.... Orange /white stripe Pink Yellow/ purple Brown/blue Orange Brown/yellow Green/black Green/pink Do these now get routed to the smaller plugs next to the f3 plug in the kick panel

07-02-2014, 05:29 PM	#2
70ina30 Leaky Injector Join Date: Jan 2008 Location: San Antonio TX Age: 40 Posts: 97 Trader Rating: (1) Feedback Score: 1 reviews	Ok I found the remaining wires were ground Abs lsd Knock sensor Check signal on diagnostics Do these stay free or do they get wired up