Flywheel bolts sheared off, - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dboyizmlg · 08-09-2014, 12:30 AM

You're supposed to tighten the bolts in criss cross pattern, in about 3 stages of tq!
With the addition of using liquid thread lock, so the bolts don't back out.

It sounds to me that you are in a bad situation... You MIGHT get away with it if you put it back together correctly!
But, that's on you!
Disclaimer! I'm not responsible for what you decide to do!
You decide what best suites you. Or you can get another crank/motor.

08-09-2014, 12:30 AM	#7
Dboyizmlg Nissanaholic! Join Date: Aug 2011 Location: SoCal (I.E.), San Berdino, Colton, Redlands Posts: 1,677 Trader Rating: (18) Feedback Score: 18 reviews	You're supposed to tighten the bolts in criss cross pattern, in about 3 stages of tq! With the addition of using liquid thread lock, so the bolts don't back out. It sounds to me that you are in a bad situation... You MIGHT get away with it if you put it back together correctly! But, that's on you! Disclaimer! I'm not responsible for what you decide to do! You decide what best suites you. Or you can get another crank/motor.