1990 240sx s13 starting problem!

[LoganDavenport]

Okay cool yeah post the picture as it would aid in solving your issue.

[s13Cory]

Here is a update. So come to find out, I had a bad started so I got a new one and now it turns over but doesn't start. My brother came over yesterday to take a look, he said that wire that was burnt was an 02 sensor. Found 2 other wires that were screwed up because they were rubbing on the belt.

Here is pictures of what I did to fix (butt connectors and stuff) and what it looked like. Still having the same problem, not getting power to the ECU and fuel pump. Also, sorry for the pictures being small, as big as image stack will let me do now.


http://imagizer.imageshack.us/v2/280...908/iTZ1Ck.jpg 02 sensor was what I was told by my brother

http://imagizer.imageshack.us/v2/280...674/1jwZH1.jpg Runs from exhaust mani into the harness

http://imagizer.imageshack.us/v2/280...913/HFmo7z.jpg I cut the burnt end off, got new wire and used butt connectors to try and fix it

http://imagizer.imageshack.us/v2/280...673/8ZtVYU.jpg another set of wires with 1 bad wire in it, used butt connector to try and fix it

http://imagizer.imageshack.us/v2/280...743/C61rV8.jpg and the 02 sensor runs through my ECU.

[s13Cory]

Bumpppppppppppp