** drag zilvians chime in** - Page 44 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Willie fisterbottom · 07-14-2014, 06:16 PM

Do an rb25 and 26 have the same bolt pattern and will transmissions swap back and forth? Asking because of this kit http://www.atiracing.com/products/adapterk/akit.htm

It says rb26 but doesn't say rb25, which is what I have.....

Sforteen · 07-20-2014, 10:05 PM

yes they are the same

Silvia479whp · 07-25-2014, 06:04 PM

For all the drag forks out there
I have rear drag kits for s13/14/15
cars with this kits has been in the 1.18 .60 ft
Come with Afco 2 way adjustable coilvers
All of the bracket to bolt together
Text me for more info 559-210-4964

Tom N · 07-25-2014, 06:11 PM

Quote:

Originally Posted by Silvia479whp

For all the drag forks out there
I have rear drag kits for s13/14/15
cars with this kits has been in the 1.18 .60 ft
Come with Afco 2 way adjustable coilvers
All of the bracket to bolt together
Text me for more info 559-210-4964

Can you just post up more info. May be interested for a S14

jr_ss · 07-25-2014, 06:27 PM

Quote:

Originally Posted by Tom N

Can you just post up more info. May be interested for a S14

Agreed. I'd like more info and installed pictures. Anything needed to be modified?

Silvia479whp · 07-25-2014, 06:29 PM

Quote:

Originally Posted by jr_ss

Agreed. I'd like more info and installed pictures. Anything needed to be modified?

all of the coilvers are custom order
comes with
-Afco coilvers
-springs
-mounting brackets
Shock mounting bracket allows the shocks to moved two inches out and it allows more Tire clearence
no modification is needed it
Pm spec of ur car
power
weight
Rear end
Tire
price for kit is 1450 shipped to your doors

Silvia479whp · 07-25-2014, 06:36 PM

Tom N · 07-25-2014, 06:43 PM

Quote:

Originally Posted by Silvia479whp

Don't see anything.

Silvia479whp · 07-25-2014, 06:59 PM

Quote:

Originally Posted by Tom N

Don't see anything.

unreal- · 07-26-2014, 11:46 AM

Unreal's S14 - 7/25/14 @ Atco 14.3@103

Last run of the night.

- yes i was sleeping at the light. Wanted to make sure the launch was nice. Ended up being pretty good! Spun 1st a bit.
- Boost was at ~8psi
- car was sluggish all night as my first few runs struggled to hit 100mph, ended up needing to trim the fuel map a bunch while in the pits. Was getting 10.0 AFRs for some reason.
- 60ft was 2.304 (yes it was terrible)
- extracting the log data in 4th gear into Virtual dyno gives me 238whp/250tq on Mustang Dyno Setting, Smoothing - 6.

Vdyno sheet:
https://fbcdn-sphotos-h-a.akamaihd.n...62448128_o.jpg

turbo-2ns · 08-03-2014, 01:55 PM

have some stuff listed in the FS section that should interest the drag racing crowd
Q45 swap, holeshot wheels, custom QA1 drag coilovers
http://zilvia.net/f/showthread.php?p...82#post5693682

2muchboost · 08-03-2014, 08:51 PM

^^^dont tell me your parting out?

turbo-2ns · 08-03-2014, 09:57 PM

No this is from another"race" car that me and a budy where working on, it's going straight axle so no need for this stuff, my personal"street" car still has the q45 setup in it

2muchboost · 08-04-2014, 01:29 AM

Glad to hear....GL with sale I will try and spread the word up here.

2muchboost · 08-04-2014, 11:55 AM

Well boyz....shameless plug if anyone needs some MT Bias Ply
http://zilvia.net/f/showthread.php?p...03#post5694203

turbo-2ns · 08-13-2014, 10:09 AM

^How did the rx7 wheels fit, I'm needing to pick up something cheep the trash in the dyno

2muchboost · 08-13-2014, 10:18 AM

The reinforced ones fit well with no issues. I then mounted them on Z32 TT wheels but now unfortunately I am staying NA so no need for the tires.

Briou · 08-13-2014, 03:28 PM

Man it has been way too long since I have been on here...I've been running pretty consistently in the mid 12s, with a 1.8-2.0 60'. I got my line lock installed, which has helped with burn outs and traction, now I just need to figure out how to set up the anti lag, to get me out of the hole. I have it set up with the AEM V2 ecu to where I have about 15-18psi of boost when I launch, but as soon as I come off the clutch the car falls on it's face...and then right about the 60' the power comes back in and the car starts doing some work.

So any other guys running the AEM V2 system with anti lag setup, or any anti las setup for that matter, having any success?

silviaNC · 08-31-2014, 10:10 PM

Hi guys. I'm new to drag racing. My project is on the dyno and will.be tuned this week.

. Im estimating 600hp and plan to hit the strip soon. Ive read most of the posts. Does wheel specs 15x 8, 5.5 BS with 26 x 10.5 Drag radials will be a good setup for 600? I also have Stance pro coilovers( not sure how much will hurt the car on the strip). And for last I still have the stock VLSD with stock axles. How big is the chance to blow axles at this power level? Ive been searching for j30 rear end and axles but havent had any luck at yards. Thanks for your help

5280VertDET · 08-31-2014, 11:16 PM

Dude. You're car needs more attention to the rear diff than some old ass j30 LSD.

It's gorgeous BTW.

silviaNC · 08-31-2014, 11:42 PM

Quote:

Originally Posted by 5280VertDET

Dude. You're car needs more attention to the rear diff than some old ass j30 LSD.

It's gorgeous BTW.

Thanks, also Ive been looking for a 97+ q45 but no luck as well.

Tom N · 09-01-2014, 07:21 AM

If you want to preserve some of those drivetrain parts you should go with a bias ply tire not a radial for the track.

silviaNC · 09-01-2014, 02:31 PM

Today i hit the lottery. Local LKQ yard had a 50% disc. And happened to have a 93 q45. I snapped the diff, driver side axle and hubs for $62.

turbo-2ns · 09-01-2014, 04:09 PM

Good job now good luck finding the 300zx axle lol

silviaNC · 09-02-2014, 05:16 PM

Quote:

Originally Posted by turbo-2ns

Good job now good luck finding the 300zx axle lol

Couldnt I just use the CV joints from the q45 and transfer them to a NA z32 driver side axle? Already found a tt axle just didnt like the price lol

turbo-2ns · 09-02-2014, 07:45 PM

Na axles are different length from my understanding, but IV never personally tried it

slow92 · 09-02-2014, 11:51 PM

Ya the price for the tt axle is not going to be cheap. They are pretty rare and most aftermarket manufactures have stopped making the axles. So if you found one you should probably jump on it. Otherwise it might take you another six months to find one. I paid $230 shipped for mine.

2muchboost · 09-03-2014, 07:29 AM

Check out the SoCal junkyards. For some reason its like the tribal graveyard for the TT axles. I reached out to a buddy that was working down there and he found 3 for me in about a months time. They are becoming more rare so act quickly.

silviaNC · 09-03-2014, 07:36 AM

Quote:

Originally Posted by 2muchboost

Check out the SoCal junkyards. For some reason its like the tribal graveyard for the TT axles. I reached out to a buddy that was working down there and he found 3 for me in about a months time. They are becoming more rare so act quickly.

Thanks for the info. Just bought one for $150 shipped. if its so rare couldnt let it go

turbo-2ns · 09-03-2014, 08:53 AM

$150 is a hell of a deal where did you find it

08-31-2014, 11:16 PM	#1310
5280VertDET Nissanaholic! Join Date: Aug 2013 Location: Denver Age: 41 Posts: 2,052 Trader Rating: (14) Feedback Score: 14 reviews	Dude. You're car needs more attention to the rear diff than some old ass j30 LSD. It's gorgeous BTW. __________________ S13 Vert \| SR \| PE1420 \| 5-Speed \| 15x9.5 - 0 \|

09-01-2014, 07:21 AM	#1312
Tom N Zilvia Addict Join Date: Oct 2012 Location: SW Florida Posts: 746 Trader Rating: (1) Feedback Score: 1 reviews	If you want to preserve some of those drivetrain parts you should go with a bias ply tire not a radial for the track. __________________ 98 240sx w/ S15 SR20DET, T2 20g, 11.22 @ 124.98

09-02-2014, 11:51 PM	#1317
slow92 Zilvia Junkie Join Date: Jun 2008 Location: NV Posts: 423 Trader Rating: (16) Feedback Score: 16 reviews	Ya the price for the tt axle is not going to be cheap. They are pretty rare and most aftermarket manufactures have stopped making the axles. So if you found one you should probably jump on it. Otherwise it might take you another six months to find one. I paid $230 shipped for mine. __________________ Sr22 in the works

07-14-2014, 06:16 PM	#1291
Willie fisterbottom Join Date: May 2014 Location: Here Posts: 19 Trader Rating: (1) Feedback Score: 1 reviews	Do an rb25 and 26 have the same bolt pattern and will transmissions swap back and forth? Asking because of this kit http://www.atiracing.com/products/adapterk/akit.htm It says rb26 but doesn't say rb25, which is what I have.....

07-20-2014, 10:05 PM	#1292
Sforteen Zilvia Junkie Join Date: Nov 2010 Location: USA Posts: 333 Trader Rating: (0) Feedback Score: 0 reviews	yes they are the same

07-25-2014, 06:04 PM	#1293
Silvia479whp Zilvia Junkie Join Date: Mar 2008 Location: Porterville Age: 36 Posts: 543 Trader Rating: (5) Feedback Score: 5 reviews	For all the drag forks out there I have rear drag kits for s13/14/15 cars with this kits has been in the 1.18 .60 ft Come with Afco 2 way adjustable coilvers All of the bracket to bolt together Text me for more info 559-210-4964

07-25-2014, 06:36 PM	#1297
Silvia479whp Zilvia Junkie Join Date: Mar 2008 Location: Porterville Age: 36 Posts: 543 Trader Rating: (5) Feedback Score: 5 reviews

07-26-2014, 11:46 AM	#1300
unreal- Zilvia Junkie Join Date: Jan 2003 Location: Central NJ Posts: 516 Trader Rating: (16) Feedback Score: 16 reviews	Unreal's S14 - 7/25/14 @ Atco 14.3@103 Last run of the night. - yes i was sleeping at the light. Wanted to make sure the launch was nice. Ended up being pretty good! Spun 1st a bit. - Boost was at ~8psi - car was sluggish all night as my first few runs struggled to hit 100mph, ended up needing to trim the fuel map a bunch while in the pits. Was getting 10.0 AFRs for some reason. - 60ft was 2.304 (yes it was terrible) - extracting the log data in 4th gear into Virtual dyno gives me 238whp/250tq on Mustang Dyno Setting, Smoothing - 6. Vdyno sheet: https://fbcdn-sphotos-h-a.akamaihd.n...62448128_o.jpg

08-03-2014, 01:55 PM	#1301
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 37 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	have some stuff listed in the FS section that should interest the drag racing crowd Q45 swap, holeshot wheels, custom QA1 drag coilovers http://zilvia.net/f/showthread.php?p...82#post5693682

08-03-2014, 08:51 PM	#1302
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 41 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	^^^dont tell me your parting out?

08-03-2014, 09:57 PM	#1303
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 37 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	No this is from another"race" car that me and a budy where working on, it's going straight axle so no need for this stuff, my personal"street" car still has the q45 setup in it

08-04-2014, 01:29 AM	#1304
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 41 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Glad to hear....GL with sale I will try and spread the word up here.

08-04-2014, 11:55 AM	#1305
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 41 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Well boyz....shameless plug if anyone needs some MT Bias Ply http://zilvia.net/f/showthread.php?p...03#post5694203

08-13-2014, 10:09 AM	#1306
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 37 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	^How did the rx7 wheels fit, I'm needing to pick up something cheep the trash in the dyno

08-13-2014, 10:18 AM	#1307
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 41 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	The reinforced ones fit well with no issues. I then mounted them on Z32 TT wheels but now unfortunately I am staying NA so no need for the tires.

08-13-2014, 03:28 PM	#1308
Briou Zilvia Member Join Date: Jun 2011 Location: Bay St. Louis, MS Age: 33 Posts: 182 Trader Rating: (3) Feedback Score: 3 reviews	Man it has been way too long since I have been on here...I've been running pretty consistently in the mid 12s, with a 1.8-2.0 60'. I got my line lock installed, which has helped with burn outs and traction, now I just need to figure out how to set up the anti lag, to get me out of the hole. I have it set up with the AEM V2 ecu to where I have about 15-18psi of boost when I launch, but as soon as I come off the clutch the car falls on it's face...and then right about the 60' the power comes back in and the car starts doing some work. So any other guys running the AEM V2 system with anti lag setup, or any anti las setup for that matter, having any success?

08-31-2014, 10:10 PM	#1309
silviaNC Zilvia Addict Join Date: Feb 2012 Location: North Carolina Age: 41 Posts: 937 Trader Rating: (17) Feedback Score: 17 reviews	Hi guys. I'm new to drag racing. My project is on the dyno and will.be tuned this week. . Im estimating 600hp and plan to hit the strip soon. Ive read most of the posts. Does wheel specs 15x 8, 5.5 BS with 26 x 10.5 Drag radials will be a good setup for 600? I also have Stance pro coilovers( not sure how much will hurt the car on the strip). And for last I still have the stock VLSD with stock axles. How big is the chance to blow axles at this power level? Ive been searching for j30 rear end and axles but havent had any luck at yards. Thanks for your help

09-01-2014, 02:31 PM	#1313
silviaNC Zilvia Addict Join Date: Feb 2012 Location: North Carolina Age: 41 Posts: 937 Trader Rating: (17) Feedback Score: 17 reviews	Today i hit the lottery. Local LKQ yard had a 50% disc. And happened to have a 93 q45. I snapped the diff, driver side axle and hubs for $62.

09-01-2014, 04:09 PM	#1314
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 37 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	Good job now good luck finding the 300zx axle lol

09-02-2014, 07:45 PM	#1316
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 37 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	Na axles are different length from my understanding, but IV never personally tried it

09-03-2014, 07:29 AM	#1318
2muchboost Nissanaholic! Join Date: Apr 2003 Location: Austin, TX Age: 41 Posts: 2,183 Trader Rating: (33) Feedback Score: 33 reviews	Check out the SoCal junkyards. For some reason its like the tribal graveyard for the TT axles. I reached out to a buddy that was working down there and he found 3 for me in about a months time. They are becoming more rare so act quickly.

09-03-2014, 08:53 AM	#1320
turbo-2ns Zilvia Junkie Join Date: Oct 2012 Location: dfw texas Age: 37 Posts: 372 Trader Rating: (4) Feedback Score: 4 reviews	$150 is a hell of a deal where did you find it