Are cnc machined iron/alloy brackets for an evo 7 brembo front brake install safe ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

aga · 10-09-2014, 07:54 AM

iron would need to get some sort of rust prevention in order to not get corroded, like a rust preventive paint, or a powdercoating if you re fancy, but that will raise the cost to the level of the aluminium one. So , since the aluminium one is lighter, everything points to that.

no there's no fear of anything bending. i have had brembos with aluminum brackets on all my 3 cars, currently on the SX and both previous ones.

10-09-2014, 07:54 AM	#1
aga Zilvia Junkie Join Date: Mar 2013 Location: Athens, Greece Age: 46 Posts: 580 Trader Rating: (0) Feedback Score: 0 reviews	iron would need to get some sort of rust prevention in order to not get corroded, like a rust preventive paint, or a powdercoating if you re fancy, but that will raise the cost to the level of the aluminium one. So , since the aluminium one is lighter, everything points to that. no there's no fear of anything bending. i have had brembos with aluminum brackets on all my 3 cars, currently on the SX and both previous ones. __________________ My Build