Enjuku Racing - ISIS Performance Engine Mounts - ** New Product **

[Enjuku Racing]

ISIS Performance Adjustable Engine Mount Set - Nissan 240sx
http://www.enjukuracing.com/products...san-240sx.html


http://www.enjukuracing.com/products...san-240sx.html

ISIS Performance Adjustable Engine Mount Set are made of 2 poly-urethane bushings and come with 8 solid spacers to adjust motor height and to improve power to the rear wheels. These mounts are a essential upgrade to any swap or when replacing damaged factory mounts.

Also, works with Hooker LS Swap mount brackets.

ISIS Performance Transmission Mount - Nissan 240sx
http://www.enjukuracing.com/products...san-240sx.html


http://www.enjukuracing.com/products...san-240sx.html

ISIS Performance Transmission Mounts are made of Poly-Urethane to help with transmission feel and to stiffen up the drive train to support better power transfer to the rear wheels. These mounts are a essential upgrade to any swap or when replaceing damaged factory mounts, they also pair great with our ISIS Performance Adjustable Engine Mount Set.

[r34sr]

When i saw these i got really excited, i buy a alot of isis stuff, i support enjuku and their products and my car has never had a single issue with any of their products....with that said.Why they heck would you guys create another motor mount like this where there is a SINGLE bolt that goes straight through the mount to connect the chassis and motor together? it might as well be called a solid mount because this is going to create gobs of vibration. I was hoping you guys would make it with 2 offset studs to reduce vibration.I do like the idea of the included spacers, i think thats great...but please make a V2 mount that uses 2 offset isolated studs in the polyurethane molding process.just my 2 cents.

[angel mkiv]

Originally Posted by r34sr

When i saw these i got really excited, i buy a alot of isis stuff, i support enjuku and their products and my car has never had a single issue with any of their products....with that said.Why they heck would you guys create another motor mount like this where there is a SINGLE bolt that goes straight through the mount to connect the chassis and motor together? it might as well be called a solid mount because this is going to create gobs of vibration. I was hoping you guys would make it with 2 offset studs to reduce vibration.I do like the idea of the included spacers, i think thats great...but please make a V2 mount that uses 2 offset isolated studs in the polyurethane molding process.just my 2 cents.

The only benefit I could think of that design is easer install maybe since you just slide in the mount and then a stud through instead of having it all one unit and being harder to fit since the studs always hit the crossmember.But if you want the offset mount stud setup just go with the drift freaq ones on here..

[KoukiMonsta]

They make it because it's cheap chinese garbage that these idiots are buying. Just like 90% of products on the market these days

[r34sr]

isis cheap chinese garbage has me making 280whp/340ftlb for a few YEARS now....

all i was pointing out is that this is clearly , in my opinion, a race only mounting system, a street setup should use a better form of isolation.

how many isis products have you used?

[EDacIouSX]

this is a slight spin on KTS engine mounts.... Circuit sports makes a copy of the KTS mounts as well, it looks just like this with 2 less spacers per mount. A lot of people have had trouble with these mounts breaking the bolt on the driver side, most likely from excessive clutch kicking

[r34sr]

thats cause they probably use a crappy bolt...i wouldnt use anything less than a grade 8/9 in this location......no such thing as excissive clutch kicking.

[ATLspeed]

Whats the height of these with the shims on and shims off?

[ATLspeed]

Originally Posted by angel mkiv

...But if you want the offset mount stud setup just go with the drift freaq ones on here..

drift freaq's aren't off set, they are center studs. Just sharing.

[Enjuku Racing]

Originally Posted by ATLspeed

Whats the height of these with the shims on and shims off?

The poly bushing is 2" in height. Each shim is .25". Total height with all shims is 3".

[Enjuku Racing]

Originally Posted by r34sr

thats cause they probably use a crappy bolt...i wouldnt use anything less than a grade 8/9 in this location......no such thing as excissive clutch kicking.

These Isis Performance mounts utilize 12.9 grade bolts.