Fuel Injector Removal!?!?! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

lous13 · 10-21-2004, 01:26 PM

IS THERE A WAY OR AN EASY WAY TO PULL OUT ONE FUEL INJECTOR ITS FRUSTRATING!! SOMEONE HELP ME OR GIVE ME SUGGESTIONS. i tried pliers, hammers, screw drivers,,, any suggestions

kingsol · 10-21-2004, 01:32 PM

well you need to remove the fuel rail and then twist and pull the injector out... if you have a fsm check it out, it'll have complete instructions, or if you search on here, i think someone did a complete write-up

phrozen · 10-21-2004, 01:54 PM

haha i failed as well.. took out the fuel rail and got 2 out but not b4 destroying the plastic.. and the other 2 well... what ever u do dont use vise grips. im still stumped and looking for some stock injectors and a fuel rail

kingsol · 10-21-2004, 02:38 PM

hmmm... i changed my o-rings a while back and i don't remember having a hard time pulling the injectors off the rail... i just gave it a slight twist while pulling.

andrave · 10-21-2004, 03:21 PM

yeah but sohc or dohc? big diff.

lous13 · 10-21-2004, 03:58 PM

damn i twisted it and flipped it and stuck a flat head and try to pry it out WTFis holding it down!?!?!!??!!? time for swap its prolly easier

sr240mike · 10-21-2004, 04:23 PM

Did you remove the fuel pressure regulator?

10-21-2004, 01:26 PM	#1
lous13 Leaky Injector Join Date: Mar 2004 Location: antelope Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	Fuel Injector Removal!?!?! IS THERE A WAY OR AN EASY WAY TO PULL OUT ONE FUEL INJECTOR ITS FRUSTRATING!! SOMEONE HELP ME OR GIVE ME SUGGESTIONS. i tried pliers, hammers, screw drivers,,, any suggestions

10-21-2004, 01:32 PM	#2
kingsol Zilvia FREAK! Join Date: Jun 2003 Location: Berkeley/San Francisco Posts: 1,435 Trader Rating: (0) Feedback Score: 0 reviews	well you need to remove the fuel rail and then twist and pull the injector out... if you have a fsm check it out, it'll have complete instructions, or if you search on here, i think someone did a complete write-up __________________ There is a time in every man's education when he arrives at the conviction that envy is ignorance; that imitation is suicide; that he must take himself for better for worse as his portion; that though the wide universe is full of good, no kernel of nourishing corn can come to him but through his toil bestowed on that plot of ground which is given to him to till. -Emerson

10-21-2004, 01:54 PM	#3
phrozen Zilvia FREAK! Join Date: Apr 2003 Location: Bay Area Posts: 1,352 Trader Rating: (0) Feedback Score: 0 reviews	haha i failed as well.. took out the fuel rail and got 2 out but not b4 destroying the plastic.. and the other 2 well... what ever u do dont use vise grips. im still stumped and looking for some stock injectors and a fuel rail __________________ This box is 400x200: Please do not put your sig pic back if it exceeds this. -Moderation

10-21-2004, 02:38 PM	#4
kingsol Zilvia FREAK! Join Date: Jun 2003 Location: Berkeley/San Francisco Posts: 1,435 Trader Rating: (0) Feedback Score: 0 reviews	hmmm... i changed my o-rings a while back and i don't remember having a hard time pulling the injectors off the rail... i just gave it a slight twist while pulling. __________________ There is a time in every man's education when he arrives at the conviction that envy is ignorance; that imitation is suicide; that he must take himself for better for worse as his portion; that though the wide universe is full of good, no kernel of nourishing corn can come to him but through his toil bestowed on that plot of ground which is given to him to till. -Emerson

10-21-2004, 04:23 PM	#7
sr240mike Zilvia FREAK! Join Date: Apr 2004 Location: California, Norcal biiaatch Posts: 1,185 Trader Rating: (0) Feedback Score: 0 reviews	Did you remove the fuel pressure regulator? __________________ TWO IN THE COOT, ONE IN THE POOT

10-21-2004, 03:21 PM	#5
andrave BANNED Join Date: Apr 2002 Location: Burton WV Posts: 2,350 Trader Rating: (0) Feedback Score: 0 reviews	yeah but sohc or dohc? big diff.

10-21-2004, 03:58 PM	#6
lous13 Leaky Injector Join Date: Mar 2004 Location: antelope Posts: 92 Trader Rating: (0) Feedback Score: 0 reviews	damn i twisted it and flipped it and stuck a flat head and try to pry it out WTFis holding it down!?!?!!??!!? time for swap its prolly easier