240sx rhd , firewall swap or lhd Configure ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

ComicArtist · 04-09-2015, 02:09 PM

To get the car driving rhd, all you need is a firewall, steering rack, column, pedals, and dash. You can flip the dash harness to make it work, but if you want a clean swap with everything to work as oem, it's a lot of work. You need everything under the dash, both wiring harnesses, hood latch cable, hatch/gas lid lever and cable, etc.

Drill the spot welds on the firewall, don't just cut it out. Trust me

04-09-2015, 02:09 PM	#1
ComicArtist Zilvia Member Join Date: Oct 2010 Location: Oklahoma City, OK Posts: 280 Trader Rating: (1) Feedback Score: 1 reviews	To get the car driving rhd, all you need is a firewall, steering rack, column, pedals, and dash. You can flip the dash harness to make it work, but if you want a clean swap with everything to work as oem, it's a lot of work. You need everything under the dash, both wiring harnesses, hood latch cable, hatch/gas lid lever and cable, etc. Drill the spot welds on the firewall, don't just cut it out. Trust me