S14 RHD conversion question (gauge cluster)

[zenki-s13]

I have not done the conversion. But unless someone has a write up explaining the whole process your best bet would be to look at wiring diagrams. It could be something to where you need to rewire the harness or it could be something which will be plug and play. Either way, unless you have the RHD harness you will more than likely need to extend parts of the harness.

good luck! If you go though the hassle dont be afraid to share your information to help others.

[magermeister]

Originally Posted by zenki-s13

I have not done the conversion. But unless someone has a write up explaining the whole process your best bet would be to look at wiring diagrams. It could be something to where you need to rewire the harness or it could be something which will be plug and play. Either way, unless you have the RHD harness you will more than likely need to extend parts of the harness.

good luck! If you go though the hassle dont be afraid to share your information to help others.

I'm actually going to pick up a GoPro tomorrow and film the rest of my conversion and get it up on YouTube so I can provide as much help as possible. I have all the full RHD harnesses. The plugs are different on the back of the clusters. I need to find the dash diagram and see if cutting the JDM plugs and wiring the USDM plugs would be possible. I do want to engage, share, and collect info on this as there's no great walk through that I have yet to find in 7 months of searching.

[EnemyS15]

Originally Posted by magermeister

I'm actually going to pick up a GoPro tomorrow and film the rest of my conversion and get it up on YouTube so I can provide as much help as possible. I have all the full RHD harnesses. The plugs are different on the back of the clusters. I need to find the dash diagram and see if cutting the JDM plugs and wiring the USDM plugs would be possible. I do want to engage, share, and collect info on this as there's no great walk through that I have yet to find in 7 months of searching.

DO NOT CUT ANY HARNESSES!!!! Do it right; de-pin and re-pin the harnesses.

[magermeister]

Originally Posted by EnemyS15

DO NOT CUT ANY HARNESSES!!!! Do it right; de-pin and re-pin the harnesses.

I didn't literally mean cut actually. I'm going way to in depth on this conversion and doing it 100% right to be cutting anything. What I'm saying is on the back of the clusters the plugs are differently shaped so I'm not exactly sure what or how I'm going to go about it just yet. I met a fella yesterday that's in the process of doing his s14 as well. If anyone has some English wiring diagrams they wouldn't mind sharing, that would be awesome and greatly appreciated