![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#2 |
Zilvia FREAK!
![]() Join Date: Jan 2004
Location: San Diego/San Francisco
Age: 39
Posts: 1,337
Trader Rating: (0)
![]() Feedback Score: 0 reviews
|
if my engine is throwing a EGR code. can I just plug up the EGR pipe and reset the ECU to pass smog?
__________________
96 all suspension s14 SOLD 90 s13 coupe - SOLD Currently rocking 2002 BMW M3 w/ custom suspension. ![]() ButtonWillow, CA entire circuit drift/grip event by shock drifting spot for sale. Take over my spot for $150 only. |
![]() |
![]() |
![]() |
#3 | |
Zilvia Addict
![]() |
Quote:
You could also have carbon buildup in the EGR valve itself. Easiest way to clean it is to spray car cleaner into the top tube of the EGR valve & move the underneath diaphram portion of the valve up & down with your fingertips as you spray carb cleaner into the top tube of the EGR valve. This helps to remove any carbon buildup you have in the EGR valve. If after doing all this, and your ECU still kicks a EGR code, then go back and check all the vacuum lines running to the intake & carbon cannister for a line that may be disconnected, cracked/split/melted or just clogged. Anyhow, hope this helps..good luck!! ID '95 SE |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|