CA HOLSET HY35 turbo for sale with downpipe - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*brndck* · 08-23-2015, 04:33 PM

SOLD SOLD SOLD SOLD

Up for sale is a used Holset HY35 turbo. It is in very good condition with no excess play in the shaft. This turbo made 430hp/350ftlbs on my sr20vet at 18psi ( i will post the dyno chart as soon as i can find it)

it is originally internal wastegate but the flapper is welded shut.

comes with a matching downpipe (o2 sensor not included)

$450 picked up for the turbo and downpipe (manifold, tial W/G, etc NOT INCLUDED, NOT FOR SALE)

562 519 5577
Tyler

lgsr20swap · 08-24-2015, 12:16 PM

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

*brndck* · 08-24-2015, 01:08 PM

Quote:

Originally Posted by lgsr20swap

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

i'll check after work and let you know!

fullthrottle · 08-24-2015, 02:18 PM

Those are really good numbers. I made 333whp 280tq at 15psi on a stock s14 sr20. Im currently running 20psi And figure I have to be damn close to 400whp. Stock cams are killing me.

*brndck* · 08-30-2015, 01:39 PM

ImageUploadedByTapatalk1440963533.148471.jpg
This is the oil feed line. I'll include both this and the drain line with the turbo

Sent from my iPhone using Tapatalk

*brndck* · 08-30-2015, 01:40 PM

Quote:

Originally Posted by lgsr20swap

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

see pix

Quote:

Originally Posted by fullthrottle

Those are really good numbers. I made 333whp 280tq at 15psi on a stock s14 sr20. Im currently running 20psi And figure I have to be damn close to 400whp. Stock cams are killing me.

yeah mine is on an sr20vet though, so a bit different numbers are to be expected

lgsr20swap · 09-12-2015, 07:58 AM

Yea I see pic but we're did u get it or what r the sizes. I'm going crazy looking for it

Sent from my SM-N915V using Tapatalk

*brndck* · 09-12-2015, 10:21 AM

Quote:

Originally Posted by lgsr20swap

Yea I see pic but we're did u get it or what r the sizes. I'm going crazy looking for it

Sent from my SM-N915V using Tapatalk

it came with the engine when i bought it, the size is HY35

mogli9000 · 09-13-2015, 04:35 AM

BuMpZ 4 Ma BoYy Tyler-40oz

*brndck* · 09-23-2015, 03:23 PM

bump still have this

outlawstar1023 · 09-23-2015, 03:40 PM

It's probably a 12mm X 1.5 fitting. If not, you can always disassemble the housing and tap it with a 1/4 NPT fitting.

outlawstar1023 · 09-23-2015, 03:41 PM

Quote:

Originally Posted by lgsr20swap

Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply?

Sent from my SM-N915V using Tapatalk

It's probably a 12mm X 1.5 fitting. If not, you can always disassemble the housing and tap it with a 1/4 NPT fitting.

*brndck* · 10-12-2015, 12:29 PM

bump again still have this.

Detheroni · 10-13-2015, 08:52 PM

im interested would you ship to torrance california? also is the downpipe only for SR or would it work with an RB as well??

*brndck* · 10-17-2015, 10:20 AM

Quote:

Originally Posted by Detheroni

im interested would you ship to torrance california? also is the downpipe only for SR or would it work with an RB as well??

um i work in paramount, and i'm in gardena all the time. i can meet up with you . the downpipe should work with SR or RB.

niSm095 · 10-17-2015, 10:25 AM

What is the powerband like with this? I'd be interested if it's a responsive unit

*brndck* · 10-18-2015, 06:25 AM

Quote:

Originally Posted by niSm095

What is the powerband like with this? I'd be interested if it's a responsive unit

It's a diesel turbo. They're designed to spool on an engine that typically only revs to 4k. They spool pretty quickly. I found the Dyno chart for my engine, I'll post it tomorrow.

*brndck* · 10-18-2015, 09:18 PM

finally remembered to take a photo of this.

08-24-2015, 02:18 PM	#4
fullthrottle Zilvia Addict Join Date: Apr 2009 Location: Saint Louis, MO Age: 38 Posts: 661 Trader Rating: (13) Feedback Score: 13 reviews	Those are really good numbers. I made 333whp 280tq at 15psi on a stock s14 sr20. Im currently running 20psi And figure I have to be damn close to 400whp. Stock cams are killing me. Last edited by fullthrottle; 08-25-2015 at 07:30 AM..

09-13-2015, 04:35 AM	#9
mogli9000 Nissanaholic! Join Date: Mar 2012 Location: Slums of Shaolin Age: 31 Posts: 1,811 Trader Rating: (68) Feedback Score: 68 reviews	BuMpZ 4 Ma BoYy Tyler-40oz __________________ Straight Outta The Slums of Shaolin

08-24-2015, 12:16 PM	#2
lgsr20swap Zilvia Junkie Join Date: Nov 2008 Location: conn Age: 44 Posts: 425 Trader Rating: (2) Feedback Score: 2 reviews	Hey I have the same turbo and getting ready to plumb it. What fitting did u use for oil supply? Sent from my SM-N915V using Tapatalk

09-12-2015, 07:58 AM	#7
lgsr20swap Zilvia Junkie Join Date: Nov 2008 Location: conn Age: 44 Posts: 425 Trader Rating: (2) Feedback Score: 2 reviews	Yea I see pic but we're did u get it or what r the sizes. I'm going crazy looking for it Sent from my SM-N915V using Tapatalk

09-23-2015, 03:40 PM	#11
outlawstar1023 Zilvia Member Join Date: Jan 2005 Location: nyc queens Age: 39 Posts: 180 Trader Rating: (5) Feedback Score: 5 reviews	It's probably a 12mm X 1.5 fitting. If not, you can always disassemble the housing and tap it with a 1/4 NPT fitting.

10-13-2015, 08:52 PM	#14
Detheroni Join Date: Jun 2015 Location: california Age: 32 Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	im interested would you ship to torrance california? also is the downpipe only for SR or would it work with an RB as well??

10-17-2015, 10:25 AM	#16
niSm095 Zilvia FREAK! Join Date: Mar 2003 Location: S. Carolina Age: 39 Posts: 1,201 Trader Rating: (14) Feedback Score: 14 reviews	What is the powerband like with this? I'd be interested if it's a responsive unit