Broken subframe stud. HALP. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Southie240 · 11-29-2015, 07:03 AM

I had this happen to me on my s14. I ended up dropping the subframe to get room to work then cutting a Hole in the floor and getting at the weld from above ground it off. I gave it some.heat and smashed it out from the bottom. Took the bushing with me to grainger and got a 5 inch long bolt that was as thick as i could fit through the inner guide of the bushing. A big washer top and bottom and it worked perfectly

11-29-2015, 07:03 AM	#1
Southie240 Join Date: Feb 2014 Location: South boston ma Age: 36 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	I had this happen to me on my s14. I ended up dropping the subframe to get room to work then cutting a Hole in the floor and getting at the weld from above ground it off. I gave it some.heat and smashed it out from the bottom. Took the bushing with me to grainger and got a 5 inch long bolt that was as thick as i could fit through the inner guide of the bushing. A big washer top and bottom and it worked perfectly