PowerFC Boost Control

[derass]

Originally Posted by boost

did you have to use a datalogit to scale for the gm map sensor? i can't imagine it being the same.

This was my first thought also.

One other thing. From my experience with EMS, you're normally able to input the frequency at which the boost control solenoid operates. You can't do this with the PowerFC. If the frequency of the MAC solenoid you're using is different than that of the A'PEXi one it may cause more problems.

[CompleteXen]

Originally Posted by RB25GUY

http://zilvia.net/f/showthread.php?t=155001

Originally Posted by derass

This was my first thought also.

One other thing. From my experience with EMS, your are normally able to input the frequency at which the boost control solenoid operates. You can't do this with the PowerFC. If the frequency of the MAC solenoid you're using is different than that of the A'PEXi one it may cause more problems.

Thanks for the info guys. Ill be picking up a datalogit this week if I can't use one locally. For now Ill disable the boost controller function and just run off wastegate until I can get this sorted out.