Type 3 Nistune " consult not connected COM3:spare " - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Frank_Jaeger · 05-07-2016, 04:23 PM

When you buy a Nistune ECU from a performance shop, they should upload a base tune with your current specs that will get your car at least drivable to a tuner / dyno.

Brandeez · 05-07-2016, 04:44 PM

Quote:

Originally Posted by Frank_Jaeger

When you buy a Nistune ECU from a performance shop, they should upload a base tune with your current specs that will get your car at least drivable to a tuner / dyno.

I'm located in Arizona, and the shop I got the installation done by is in Tennessee, there is a base map for a stock s13 sr20 but I just installed a z32 maf, walbro 255, and 850cc Injectors. I planned on getting the car tuned on these new parts but I'm having trouble getting the ecu to respond..

I noticed that on my ecu there were a few pins missing that correspond to the consult plug so I have now cut out the consult plug and am going to insert the pins to my harness and straight wire up the consult plug to eliminate any kind of wiring problem, because at that point it would have to be something wrong with my nistune board.

05-07-2016, 04:23 PM	#1
Frank_Jaeger Zilvia FREAK! Join Date: Jan 2012 Location: Port Charlotte, Florida Age: 33 Posts: 1,352 Trader Rating: (1) Feedback Score: 1 reviews	When you buy a Nistune ECU from a performance shop, they should upload a base tune with your current specs that will get your car at least drivable to a tuner / dyno.