95 front mount install mount help - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Modified Ryan · 07-20-2016, 07:49 PM

I have a 95 with a s13 sr20det swap, the small front mount that is on it developed a boost leak and I am in the process of replacing it. The old intercooler was bolted at the top to the bottom of the bumper support, it was only 7" tall I believe.

I just purchased the s14 with s13 sr20 cx racing front mount kit, 31x11x3, now I already have all the piping ran, bumper and support are off the car and I can't figure out how to mount this thing. Can someone please post some pictures, actually as many people as possible, of the way their front mount is actually mounted to the car.

I would greatly appreciate any help, I have two straight brackets that I believe bolt to the bottom and two L brackets that are 90 degrees I have no idea where to bolt. I do not have a hood latch bracket either.

Modified Ryan · 07-21-2016, 06:51 AM

If I unbolt the very front bolt of the subframe I believe it is, do I have to have a jack under it or will it be ok? I am new to Nissan's so I apologize if this is a stupid question.

Ryan4dc · 08-07-2016, 11:54 PM

Don't have an s14. The L brackets are solidly mounted to the intercooler?

07-20-2016, 07:49 PM	#1
Modified Ryan Join Date: May 2005 Location: Conway, AR Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	95 front mount install mount help I have a 95 with a s13 sr20det swap, the small front mount that is on it developed a boost leak and I am in the process of replacing it. The old intercooler was bolted at the top to the bottom of the bumper support, it was only 7" tall I believe. I just purchased the s14 with s13 sr20 cx racing front mount kit, 31x11x3, now I already have all the piping ran, bumper and support are off the car and I can't figure out how to mount this thing. Can someone please post some pictures, actually as many people as possible, of the way their front mount is actually mounted to the car. I would greatly appreciate any help, I have two straight brackets that I believe bolt to the bottom and two L brackets that are 90 degrees I have no idea where to bolt. I do not have a hood latch bracket either.

08-07-2016, 11:54 PM	#3
Ryan4dc Join Date: Aug 2015 Location: Hawaii Posts: 11 Trader Rating: (1) Feedback Score: 1 reviews	Don't have an s14. The L brackets are solidly mounted to the intercooler? __________________ 1989 mitsubishi mightymax....daily 2003 lancer evolution .......money pit

07-21-2016, 06:51 AM	#2
Modified Ryan Join Date: May 2005 Location: Conway, AR Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	If I unbolt the very front bolt of the subframe I believe it is, do I have to have a jack under it or will it be ok? I am new to Nissan's so I apologize if this is a stupid question.