The Dash/Cluster swap/conversion thread - Page 5 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

twofortyrida1388 · 06-04-2013, 08:41 PM

Quote:

Originally Posted by unwtdhero

Write up pleaseeee

What he said haha. That's sick I hope someone figures out the speedo issue. Those clusters are pretty sexy. I've been looking for one of the euro 140mph s13 clusters for a while now.

username · 06-04-2013, 10:34 PM

now that i've had it for a year i might as well spill the beans....

If you cross reference the s2000 pinout(found on a lot of honda forums) and the 240 cluster pinout it really simple.

-You can only use an ap1 cluster as the ap2 need the s2000 ecu to work
-Power, ground, blinkers, brights, dimmer just use the same wire on the 240 cluster harness
-fuel gauge uses the same wire but requires a 27?ohm resistor to be somewhat close
-tach is the wrong voltage so you either need a dakota converter or do whats called a "pull up resistor". T into the rpm signal a 12v source with a 680?ohm resister. This will bring the 5v 240 signal upto the needed 12v signal. Will be accurate for 4 cylinder engines.

Think that covers the basics. It was a year ago i did the swap with a digital cluster harness so i dont have it written down anywhere.

bombaybe · 06-04-2013, 10:58 PM

Just got this done on my convertible today. Bought cluster w/HUD on Craigslist for $110, they pulled it off a junk yard thinking it was a plug and play or something.
HUD heads up display works(Do not cut the dashboard, get a S13 coupe dashboard with HUD slot)
Mad wires to match up, nothing a FSM and a solder iron can't handle
Download a '94 maxima, 89-94 240sx FSM and prolly some pills and you're good to go! Just match up the wires
Fuel gauge is not working properly, might need a maxima fuel sending unit. Shows 3/4 of thank but I only have 1/4 in tank with the original cluster. Need help on this...

twofortyrida1388 · 06-14-2013, 05:02 AM

Thats awesome ^^^ actually the first time I've seen one actually wired in and running in an s-chassis. Thanks username. Seems like it would have to be done the old fashioned way.

WheelWhore · 06-14-2013, 05:50 PM

Can I play?

twofortyrida1388 · 06-15-2013, 12:35 AM

hell yeah, I love this stuff.

rubhamusan · 07-03-2013, 02:23 PM

TheCakeIsALie · 09-29-2013, 04:37 PM

This may be getting a little extreme, but I supposed with patience anything is possible. I think this would be very nice looking. If you've ever sat inside a CRZ, you'll know the pictures do this cluster no justice. And correct me if im wrong, but I believe as you approach redline/enter redline, the backlight to the tach fades and eventually turns red. Mega awesome in my opinion.

http://0.tqn.com/d/cars/1/0/L/7/2/11_crz_ip.jpg

http://www.ridelust.com/wp-content/u...s1-500x333.jpg

TheCakeIsALie · 09-29-2013, 04:38 PM

Also, the G37 and IS300 ones are also pretty legit. I like those. Just my .02

S T Y L E S · 09-29-2013, 09:08 PM

Detailed pics of the s2000 cluster please!

WheelWhore · 08-06-2014, 04:28 PM

No one else has done a S2k Cluster? Looking at putting on in my S14.

Shouldnt be terribly hard.

R3cK · 09-09-2015, 11:22 AM

any idea? no rpm. ca18det cluster incl resistor and sr20det with 62ecu.
triplechecked pinouts.

https://www.youtube.com/watch?v=ACoQvaZO89s

DEMo · 10-23-2015, 08:42 AM

Working G35 Cluster in S13.

https://youtu.be/JLkXX7UdWNk

Gingersmurf · 10-23-2015, 09:55 AM

Quote:

Originally Posted by DEMo

Working G35 Cluster in S13.

https://youtu.be/JLkXX7UdWNk

That's really cool, but i feel those lights in the dash are too bright.. Might just be personal preference though

DEMo · 10-23-2015, 01:05 PM

Quote:

Originally Posted by Gingersmurf

That's really cool, but i feel those lights in the dash are too bright.. Might just be personal preference though

Thanks! The filter makes it appear that way but it's OEM. The stock S13 dimmer control switch and headlight dim will be wired in soon.

Malik · 10-23-2015, 01:20 PM

that g35 cluster looks good demo... and the motor sounds good too

Gingersmurf · 10-23-2015, 01:29 PM

Quote:

Originally Posted by DEMo

Thanks! The filter makes it appear that way but it's OEM. The stock S13 dimmer control switch and headlight dim will be wired in soon.

Perfect. excellent work

ehhhregartless · 03-06-2016, 04:10 PM

Slanderous · 03-07-2016, 04:16 PM

The maxima hud is amazing. What I wouldn't do for a plug and play

tuzzio · 08-08-2016, 01:14 PM

Finished up my cluster last week. Made the backing plate out of a butting board. I'm a cheap fuck, but what broadfield does is amazing. nothing but respect for him. Thanks for getting me my gauges Toby.

michaelbsr20 · 08-13-2016, 08:08 AM

tuzzio, what brand are those guages?

Ronald_Mcdonald · 08-13-2016, 05:21 PM

Looks like Speedhut.

ditchs14 · 08-13-2016, 11:02 PM

anyone ever messed with a German s14 cluster? the one i got said its a zenki unit and it should just work like all the rest of the cluster. but my tach is off pretty bad. its just a stock zenki with a KA

tuzzio · 08-14-2016, 12:55 PM

Quote:

Originally Posted by michaelbsr20

tuzzio, what brand are those guages?

Quote:

Originally Posted by Ronald_Mcdonald

Looks like Speedhut.

This. Holla at broadfield for a quality discount.

EJ8 944 · 08-15-2016, 01:05 PM

Quote:

Originally Posted by ditchs14

anyone ever messed with a German s14 cluster? the one i got said its a zenki unit and it should just work like all the rest of the cluster. but my tach is off pretty bad. its just a stock zenki with a KA

Pics? My UK cluster was PnP no issues.

rcefoonia · 08-15-2016, 09:55 PM

R33 Cluster is pretty similar size/shape to an S14 isn't it?

rcefoonia · 08-15-2016, 10:00 PM

wow that Z33 dash definitely looks awesome.

Davizz · 08-19-2016, 12:57 PM

How about some custom stuff:

Davizz · 08-19-2016, 01:01 PM

How about some custom stuff:

ehhhregartless · 09-18-2016, 02:28 PM

06-04-2013, 10:58 PM	#123
bombaybe Leaky Injector Join Date: Aug 2007 Location: north hollywood Posts: 76 Trader Rating: (1) Feedback Score: 1 reviews	Just got this done on my convertible today. Bought cluster w/HUD on Craigslist for $110, they pulled it off a junk yard thinking it was a plug and play or something. HUD heads up display works(Do not cut the dashboard, get a S13 coupe dashboard with HUD slot) Mad wires to match up, nothing a FSM and a solder iron can't handle Download a '94 maxima, 89-94 240sx FSM and prolly some pills and you're good to go! Just match up the wires Fuel gauge is not working properly, might need a maxima fuel sending unit. Shows 3/4 of thank but I only have 1/4 in tank with the original cluster. Need help on this... __________________ Last edited by bombaybe; 06-04-2013 at 11:08 PM.. Reason: Adding more information

06-14-2013, 05:02 AM	#124
twofortyrida1388 Zilvia Addict Join Date: Jan 2007 Location: Wilmywood, NC Age: 36 Posts: 612 Trader Rating: (0) Feedback Score: 0 reviews	Thats awesome ^^^ actually the first time I've seen one actually wired in and running in an s-chassis. Thanks username. Seems like it would have to be done the old fashioned way. __________________ Boost Coming soon...

06-15-2013, 12:35 AM	#126
twofortyrida1388 Zilvia Addict Join Date: Jan 2007 Location: Wilmywood, NC Age: 36 Posts: 612 Trader Rating: (0) Feedback Score: 0 reviews	hell yeah, I love this stuff. __________________ Boost Coming soon...

10-23-2015, 08:42 AM	#133
DEMo Zilvia Member Join Date: Feb 2010 Location: Earth Age: 35 Posts: 167 Trader Rating: (2) Feedback Score: 2 reviews	Working G35 Cluster in S13. https://youtu.be/JLkXX7UdWNk __________________ Instagram: @hexagarage for VQ S Chassis Parts

03-06-2016, 04:10 PM	#138
ehhhregartless Post Whore! Join Date: Jul 2009 Location: nepa Age: 41 Posts: 2,775 Trader Rating: (13) Feedback Score: 13 reviews	__________________ www.zeedakay.com IG: @zeedakay

06-04-2013, 10:34 PM	#122
username Zilvia Member Join Date: Sep 2008 Location: Florida Age: 34 Posts: 207 Trader Rating: (5) Feedback Score: 5 reviews	now that i've had it for a year i might as well spill the beans.... If you cross reference the s2000 pinout(found on a lot of honda forums) and the 240 cluster pinout it really simple. -You can only use an ap1 cluster as the ap2 need the s2000 ecu to work -Power, ground, blinkers, brights, dimmer just use the same wire on the 240 cluster harness -fuel gauge uses the same wire but requires a 27?ohm resistor to be somewhat close -tach is the wrong voltage so you either need a dakota converter or do whats called a "pull up resistor". T into the rpm signal a 12v source with a 680?ohm resister. This will bring the 5v 240 signal upto the needed 12v signal. Will be accurate for 4 cylinder engines. Think that covers the basics. It was a year ago i did the swap with a digital cluster harness so i dont have it written down anywhere.

06-14-2013, 05:50 PM	#125
WheelWhore Zilvia Addict Join Date: Jan 2010 Location: NC Age: 39 Posts: 724 Trader Rating: (4) Feedback Score: 4 reviews	Can I play?

07-03-2013, 02:23 PM	#127
rubhamusan Zilvia Member Join Date: Oct 2008 Location: Knoxville,TN Age: 52 Posts: 201 Trader Rating: (3) Feedback Score: 3 reviews

09-29-2013, 04:37 PM	#128
TheCakeIsALie Join Date: Oct 2008 Location: Wisconsin Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	This may be getting a little extreme, but I supposed with patience anything is possible. I think this would be very nice looking. If you've ever sat inside a CRZ, you'll know the pictures do this cluster no justice. And correct me if im wrong, but I believe as you approach redline/enter redline, the backlight to the tach fades and eventually turns red. Mega awesome in my opinion. http://0.tqn.com/d/cars/1/0/L/7/2/11_crz_ip.jpg http://www.ridelust.com/wp-content/u...s1-500x333.jpg

09-29-2013, 04:38 PM	#129
TheCakeIsALie Join Date: Oct 2008 Location: Wisconsin Posts: 7 Trader Rating: (0) Feedback Score: 0 reviews	Also, the G37 and IS300 ones are also pretty legit. I like those. Just my .02

09-29-2013, 09:08 PM	#130
S T Y L E S Leaky Injector Join Date: Mar 2013 Location: Texas Posts: 144 Trader Rating: (0) Feedback Score: 0 reviews	Detailed pics of the s2000 cluster please!

08-06-2014, 04:28 PM	#131
WheelWhore Zilvia Addict Join Date: Jan 2010 Location: NC Age: 39 Posts: 724 Trader Rating: (4) Feedback Score: 4 reviews	No one else has done a S2k Cluster? Looking at putting on in my S14. Shouldnt be terribly hard.

09-09-2015, 11:22 AM	#132
R3cK Zilvia Member Join Date: Nov 2011 Location: bavaria Posts: 159 Trader Rating: (0) Feedback Score: 0 reviews	any idea? no rpm. ca18det cluster incl resistor and sr20det with 62ecu. triplechecked pinouts. https://www.youtube.com/watch?v=ACoQvaZO89s

10-23-2015, 01:20 PM	#136
Malik Nissanaholic! Join Date: Jun 2013 Location: Queens, NY Posts: 1,796 Trader Rating: (0) Feedback Score: 0 reviews	that g35 cluster looks good demo... and the motor sounds good too

03-07-2016, 04:16 PM	#139
Slanderous Join Date: Mar 2016 Location: West Virginia Age: 33 Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	The maxima hud is amazing. What I wouldn't do for a plug and play

08-08-2016, 01:14 PM	#140
tuzzio Post Whore! Join Date: Oct 2013 Location: Western Mass. Posts: 2,649 Trader Rating: (3) Feedback Score: 3 reviews	Finished up my cluster last week. Made the backing plate out of a butting board. I'm a cheap fuck, but what broadfield does is amazing. nothing but respect for him. Thanks for getting me my gauges Toby.

08-13-2016, 08:08 AM	#141
michaelbsr20 Join Date: Apr 2014 Location: IN Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	tuzzio, what brand are those guages?

08-13-2016, 05:21 PM	#142
Ronald_Mcdonald Zilvia Member Join Date: Feb 2007 Location: 'Merica Age: 37 Posts: 198 Trader Rating: (0) Feedback Score: 0 reviews	Looks like Speedhut. __________________ Determined to be famous, destined to be infamous.

08-13-2016, 11:02 PM	#143
ditchs14 Zilvia Junkie Join Date: Dec 2008 Location: seaford de Posts: 475 Trader Rating: (1) Feedback Score: 1 reviews	anyone ever messed with a German s14 cluster? the one i got said its a zenki unit and it should just work like all the rest of the cluster. but my tach is off pretty bad. its just a stock zenki with a KA

08-15-2016, 09:55 PM	#146
rcefoonia Join Date: Aug 2016 Location: uk Age: 37 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	R33 Cluster is pretty similar size/shape to an S14 isn't it?

08-15-2016, 10:00 PM	#147
rcefoonia Join Date: Aug 2016 Location: uk Age: 37 Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	wow that Z33 dash definitely looks awesome.

08-19-2016, 12:57 PM	#148
Davizz Leaky Injector Join Date: Jul 2012 Location: Netherlands Age: 43 Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	How about some custom stuff:

08-19-2016, 01:01 PM	#149
Davizz Leaky Injector Join Date: Jul 2012 Location: Netherlands Age: 43 Posts: 64 Trader Rating: (1) Feedback Score: 1 reviews	How about some custom stuff:

09-18-2016, 02:28 PM	#150
ehhhregartless Post Whore! Join Date: Jul 2009 Location: nepa Age: 41 Posts: 2,775 Trader Rating: (13) Feedback Score: 13 reviews	__________________ www.zeedakay.com IG: @zeedakay