Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 12-19-2004, 09:56 AM   #12
89s132b
Zilvia Member
 
Join Date: Apr 2003
Location: Oklahoma
Posts: 220
Trader Rating: (0)
89s132b is an unknown quantity at this point
Feedback Score: 0 reviews
The SAFC cannot adjust fuel when your ECU is in closed loop (i.e. while idling)
Your O2 sensor feedback will maintain your a/f ratios regardless of your fuel pressure and SAFC setings. But still you don't want to pump it up too much

Rule of thumb is don't run more than 60 psi. It takes 4 times the fuel pressure to double fuel flow so it doesn't help as much as you would think anyways. Raising the pressure to extreme levels is very hard on the pump and can lead to leaks or failures in the plumbing and injectors themselves. Plus it changes your injector latency so they won't be firing at quite the right (optimum) time.

It is much better to buy the right sized injectors.

hope this helps
89s132b is offline   Reply With Quote
 

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:53 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net