Chasing lean/misfire the last 6 Months. Built Longblock

[R3b]

Originally Posted by KAT-PWR

Releasing the upper tensioner causes the chain/cam/idler position to move.

I've taken it off about 4 times now to do the top cam timing and everytime from what i've noticed the sprocket links havent moved and car ran the exact same.

If it does cause it to move then how do reset the sprocket without taking off the pan, crank and front cover? Didnt you just finish the spare motor? Im sure you can reference either one of the pictures I posted.

[KAT-PWR]

Originally Posted by R3b

I've taken it off about 4 times now to do the top cam timing and everytime from what i've noticed the sprocket links havent moved and car ran the exact same.

If it does cause it to move then how do reset the sprocket without taking off the pan, crank and front cover? Didnt you just finish the spare motor? Im sure you can reference either one of the pictures I posted.

You chains looks fine

Also seal up the maf

[R3b]

Originally Posted by KAT-PWR

You chains looks fine

Also seal up the maf

I sealed it up with expoxy and no change. My old one was sealed up top to bottom and ran the same way. Even with this new one that is basically untouched it leaks just a tiny bit.