The everything cd009 swap thread.

[brndck]

for everyone
this is the fsm for z33 trans (cdxxx, not sure about z34)

it also has a diagram showing the only way I've found to tell cd008 apart from cd009

http://pdf.textfiles.com/manuals/AUT...pe/2005/mt.pdf

you're welcome

[travon47]

Originally Posted by brndck

for everyone
this is the fsm for z33 trans (cdxxx, not sure about z34)

it also has a diagram showing the only way I've found to tell cd008 apart from cd009

http://pdf.textfiles.com/manuals/AUT...pe/2005/mt.pdf

you're welcome

I've looked at this a few times before but don't see what diagram your talking about that shows you the difference? Unless your talking about looking at the synchros which are obviously different, since that's what the changes mostly are.

[brndck]

Originally Posted by travon47

I've looked at this a few times before but don't see what diagram your talking about that shows you the difference? Unless your talking about looking at the synchros which are obviously different, since that's what the changes mostly are.

page 21 there is a blow apart diagram, CD008 has a 2pc bearing retainer thing (items 22 & 23) where CD009 its one piece (item 22).



when you remove the rear extension (item 27) you can see this, and other than pulling the whole gear set out to inspect the synchros, this is the fastest method I've found of determining if you have cd009 or not

[travon47]

Originally Posted by brndck

page 21 there is a blow apart diagram, CD008 has a 2pc bearing retainer thing (items 22 & 23) where CD009 its one piece (item 22).



when you remove the rear extension (item 27) you can see this, and other than pulling the whole gear set out to inspect the synchros, this is the fastest method I've found of determining if you have cd009 or not

Oh word, yeah not planning on opening either of mine up anytime soon since they are both installed lol. Good to know if you have to take the case off though