Ls swapped 240 cooling fans

[2muchboost]

The Lincoln/Ford fan is a beast but it has a large footprint to fit between fan and accessory drive. I used the Mishimoto Setup and was having cooling issues which were traced back to the fan setup. I swapped the Mish Fans (not knocking them as the setup was bought second hand) out for the Altima fans and never had an issue. I used a sealant for the fan shroud to close any gaps between the fans and rad.

This round I have a Griffin Setup with custom Derrale Single Fan which has been working well for some of my friends setups. Also setting up an Oil Cooler Setup for my next build.

Also, try using a good Low Temp Thermostat...might help maintain the setup cool.

[alwaysnboost]

Originally Posted by 2muchboost

The Lincoln/Ford fan is a beast but it has a large footprint to fit between fan and accessory drive. I used the Mishimoto Setup and was having cooling issues which were traced back to the fan setup. I swapped the Mish Fans (not knocking them as the setup was bought second hand) out for the Altima fans and never had an issue. I used a sealant for the fan shroud to close any gaps between the fans and rad.

This round I have a Griffin Setup with custom Derrale Single Fan which has been working well for some of my friends setups. Also setting up an Oil Cooler Setup for my next build.

Also, try using a good Low Temp Thermostat...might help maintain the setup cool.

Thank your for taking the time to leave detailed info. May go over to the dual spal 11 inch high performance set up.