Cooling panels

[alwaysnboost]

Originally Posted by Kingtal0n

4 steam ports need to run to the top tank of the radiator. Do not block rear steam port lines.
if not running a heater core, block the heater lines in the water pump with tap and plug. Do not loop.

Use high quality fans, I used Altima 93-97 fans (ebay $75) and a throw-away aluminum radiator (ebay $90) and my LS swap stays cool running only 1 fan. And I am single turbo, exhaust pipe runs all over the engine bay.

Thank you for this information. I'm still running a heater core so I don't need to block the lines. As far as the steam port the two towards the front of the motor are joined and ran to my expansion tank. Are you saying the rears need to be joined and ran to the expansion tank too?

One more question: what is your current engine temp at idle and while cruising?