Stock S14 bolts too short for SPL rear arms

[FaLKoN240]

Get the eccentric lock out kit and be done with stock bolts. Just put the stock bolts through the stock arms and keep them handy for spares on a track day.

[Koukiii]

Originally Posted by FaLKoN240

Get the eccentric lock out kit and be done with stock bolts. Just put the stock bolts through the stock arms and keep them handy for spares on a track day.

I have no idea what that is but I'm gonna look it up. thanks

[FaLKoN240]

Originally Posted by Koukiii

I have no idea what that is but I'm gonna look it up. thanks

http://www.splparts.com/products/spl...2-r33-r34.html

[Koukiii]

Originally Posted by FaLKoN240

http://www.splparts.com/products/spl...2-r33-r34.html

Thanks man. According to the kit you referenced it only works for the upper camber arms and rear toe arms. I still would need to source longer bolts for the rear traction rods correct?

[FaLKoN240]

Originally Posted by Koukiii

Thanks man. According to the kit you referenced it only works for the upper camber arms and rear toe arms. I still would need to source longer bolts for the rear traction rods correct?

I believe that the traction rod isn't adjustable from the factory with an eccentric bolt.

Hit up SPL and let them know that you're having this problem. If you're using their arms they need to know some of their customers are running into this issue.