SR20 CAS question

[brndck]

Originally Posted by TheRealSy90

There used to be a old website with sr20 set up tricks for getting any stock sr to run great but it seems to be down now. Or the link isn't working for me: https://www.plmsdevelopments.com/ind...r20-setup-tips

the site is still up, but you get that "this site is not secure" error message, then you have to click "proceed anyways"

[TheRealSy90]

Originally Posted by S14rebuild

Easy, start car, disconnect tps sensor, then rev the motor a few times past 3000rpm....this will lock the ecu in timming mode, and allow u to adjust timing at idle. Once done. Plug tps back in. N good togo. Ive always done this once the car is at operating temperature.

That’s what’s supposed to work but I’ve had it not work a few times in the past. Basically just turned the car off and on to reset and try again.

Originally Posted by brndck

the site is still up, but you get that "this site is not secure" error message, then you have to click "proceed anyways"

That’s what I was getting but there was no proceed option. Probably due to my work firewall idk.


Sent from my iPhone using Tapatalk