Bleeding brake issue

[samotage]

Two man bleed or single man power bleeding?

I love my vac power bleeder, cheap and awesome, it does take a while to suck it all through however. One strategy is to crack the bleed screws a little, put some fresh cardboard underneath and wait, check every hour or so. When you get your first drips, re-commence!

Another tip for power bleeding is some Teflon tape on the threads, this will reduce the air ingress at this screw thread.

Wait, be patient! With the power blended locked on, pump the pedal, rinse and repeat, and keep checking your reservoir state stoped up.

Don?t stop till the bubbles do. And yes, do the furthest back, you may need to trace the lines to work out which is which at the rears.


Sent from my iPad using Tapatalk