s13 sr20det fuel/injector issue

[dsastr_clan]

Originally Posted by S14rebuild

Someone was not kind to that engine....lots of boost and no tuning/fuel....

Its time for a rebuild.

This still doesnt explain the valve train noise

Lifters-when u press down on them they shouldnt move at all. Should not beable to squeeze them, no play

You are right, I'm pulling the block out and doing the bearings and pistons. I've never done this. But I fee confident, I'm just not familiar with setting time. Do you happen to know about any write ups?

And, have you ever pull the engine out without taking the transmission. I have always pulled both. But since the head is out along with the intake and exhaust manifold, it would be so easy to get the block out.


Has anyone done? How hard was it to put the engine back in?

[lok]

Originally Posted by dsastr_clan

You are right, I'm pulling the block out and doing the bearings and pistons. I've never done this. But I fee confident, I'm just not familiar with setting time. Do you happen to know about any write ups?

And, have you ever pull the engine out without taking the transmission. I have always pulled both. But since the head is out along with the intake and exhaust manifold, it would be so easy to get the block out.

Has anyone done? How hard was it to put the engine back in?

This is gonna be good

Micrometers too while you're at it.

[dsastr_clan]

Originally Posted by lok

This is gonna be good

Micrometers too while you're at it.

took the motor out no tranny, I may have to pull the tranny later when I put it back in. Whoknows!

but, all of the sudden I'm building this sr i guess! never done anything like this before, one thing led to the other.

https://www.youtube.com/watch?v=_RSZ...lqZs8MmvaDx-q0