Another dumb vlsd question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*fliprayzin240sx* · 01-25-2005, 08:00 PM

Hmm...funny, cuz i bought a VLSD from venus and it bolt rite up onto my non-abs non-lsd SE. Its off a JDM s14. Only thing that i did was I used the drive shaft that i got with it cuz the one I had was off. *cant remember if it was shorter or longer...shorter iirc*

infinitexsound · 01-25-2005, 08:20 PM

i dont believe u ray......... j/k how much was that jdm diff?

Agent_S13 · 01-26-2005, 01:11 PM

I put in an S14/J30 (w/ abs sensor) into my base S13 (non ABS/LSD) and all I switched was the differential cover and got some ES bushings/longer bolts for it. Everything else was fine.

1) Didn't need to swap driveshafts -- my S13 was shorter than the S14 I received (said 95 240sx on it) and the length was negated by the fact that my S13 differential cover was shorter than the S14/J30 one.

2) Also, no problems with the output shafts either. Everything bolted up together with no problems (It was a 96+ J30 LSD with 6-bolt pattern).

I've only had the VLSD for a few months and I have not had any problems driving the car... except for the gear ratio (3.92 vs my stock 4.08 but its very neglible and I could care less)

-Aaron
'91 240sx coupe

01-25-2005, 08:00 PM	#1
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Hmm...funny, cuz i bought a VLSD from venus and it bolt rite up onto my non-abs non-lsd SE. Its off a JDM s14. Only thing that i did was I used the drive shaft that i got with it cuz the one I had was off. cant remember if it was shorter or longer...shorter iirc __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

01-25-2005, 08:20 PM	#2
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 42 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	i dont believe u ray......... j/k how much was that jdm diff?

01-26-2005, 01:11 PM	#3
Agent_S13 Zilvia Junkie Join Date: Mar 2002 Location: Bay Area, CA Posts: 492 Trader Rating: (6) Feedback Score: 6 reviews	I put in an S14/J30 (w/ abs sensor) into my base S13 (non ABS/LSD) and all I switched was the differential cover and got some ES bushings/longer bolts for it. Everything else was fine. 1) Didn't need to swap driveshafts -- my S13 was shorter than the S14 I received (said 95 240sx on it) and the length was negated by the fact that my S13 differential cover was shorter than the S14/J30 one. 2) Also, no problems with the output shafts either. Everything bolted up together with no problems (It was a 96+ J30 LSD with 6-bolt pattern). I've only had the VLSD for a few months and I have not had any problems driving the car... except for the gear ratio (3.92 vs my stock 4.08 but its very neglible and I could care less) -Aaron '91 240sx coupe