From a free pile of rust comes a complete build - Now with 100% more VR30DDTT! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

projectsupra · 06-10-2022, 01:41 PM

Small update, after several trips to Autozone/NAPA to find more molded hoses that would fit where I need, I finally have both heat exchanger system and radiator system sealed and ready for fluids, minus a few clamps and brackets that still need installed/fabricated.

Lower rad hose is a d72170, perfect fit, just cut the end off and added 17" of some other fairly straight hose I had, plus 2 35mm HPS hose joiners.

Next up was completion of the ECU/fuse box/E36 power distribution block bracket.

And a quick bracket for the VTC module.

Plus I finally found a good used gas tank after 3 years of looking, no broken/cracked baffles, no rust inside, time to get rid of the fuel cell and get my cargo space back.

Just needed a quick wire brush and paint, new seals and we're ready for install.

06-10-2022, 01:41 PM	#1
projectsupra Zilvia Member Join Date: Jul 2008 Location: Jupiter, FL Age: 41 Posts: 172 Trader Rating: (1) Feedback Score: 1 reviews	Small update, after several trips to Autozone/NAPA to find more molded hoses that would fit where I need, I finally have both heat exchanger system and radiator system sealed and ready for fluids, minus a few clamps and brackets that still need installed/fabricated. Lower rad hose is a d72170, perfect fit, just cut the end off and added 17" of some other fairly straight hose I had, plus 2 35mm HPS hose joiners. Next up was completion of the ECU/fuse box/E36 power distribution block bracket. And a quick bracket for the VTC module. Plus I finally found a good used gas tank after 3 years of looking, no broken/cracked baffles, no rust inside, time to get rid of the fuel cell and get my cargo space back. Just needed a quick wire brush and paint, new seals and we're ready for install.