The "Identify this" thread - Page 452 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

LtSlayer · 11-19-2020, 09:57 PM

anyone know what this is from?

TheRealSy90 · 11-20-2020, 11:13 AM

Looks like it came out of a swamp.

LtSlayer · 11-20-2020, 01:44 PM

Quote:

Originally Posted by TheRealSy90

Looks like it came out of a swamp.

I found it at the bottom of the touge

***FaLKoN240*** · 11-23-2020, 10:55 AM

Leave it there next time.

BryanSayWhat · 12-17-2020, 09:23 PM

Quote:

Originally Posted by DEGUZZI

Can anyone ID this front bumper?

Another picture from VHS_refresh's IG:
https://www.instagram.com/p/BppkINOh67l/

"Drift Tengoku January 2003"
https://www.instagram.com/p/B_N09RODMUi/

Quote:

Originally Posted by dorkidori_s13

TBO style bumper for the most part (the lower vents and center snout are slightly different)

Quote:

Originally Posted by DEGUZZI

Yeah, at first glance I thought it was TBO also, but the cutout in the thicker, middle section and the split lower vents are very distinct

Just noticed that the AWD and SR22VET (950whp) powered S13 from PJ's Quick Bits has this same front bumper (lol):

Unfortunately, the Super Street article that featured it doesn't reference what bumper it is... I guess you could try asking PJ's Quick Bits on instagram/ facebook, though.

shobotan · 12-17-2020, 10:50 PM

^If my HyperRev is to be believed that bar is from a company called Avance/Amphini Development.

Silv1401 · 12-19-2020, 02:23 AM

Anyone recognize this brand logo? On a pair of fiberglass S14 rear spats I picked up in a package deal. The number on them brings up Land Rover parts, funny enough.

Sent from my SM-G950U using Tapatalk

***dorkidori_s13*** · 12-19-2020, 10:26 AM

Quote:

Originally Posted by Silv1401

Anyone recognize this brand logo? On a pair of fiberglass S14 rear spats I picked up in a package deal. The number on them brings up Land Rover parts, funny enough.

cheap ebay brand... i bought a set of their valances off ebay 4-5 years back. they claimed they were s13 b-wave coupe valances, turns out they were for the hatch (which i already had).

Silv1401 · 12-19-2020, 10:55 AM

Quote:

Originally Posted by dorkidori_s13

cheap ebay brand... i bought a set of their valances off ebay 4-5 years back. they claimed they were s13 b-wave coupe valances, turns out they were for the hatch (which i already had).

Dang. So you're telling me these aren't some long forgotten rare JDM brand? Haha thanks for the identification.

Sent from my SM-G950U using Tapatalk

DEGUZZI · 12-19-2020, 12:10 PM

Quote:

Originally Posted by BryanSayWhat

Just noticed that the AWD and SR22VET (950whp) powered S13 from PJ's Quick Bits has this same front bumper (lol):

Unfortunately, the Super Street article that featured it doesn't reference what bumper it is... I guess you could try asking PJ's Quick Bits on instagram/ facebook, though.

Sweet! Thanks for the lead--I just sent them a DM

azngangster2002 · 02-27-2021, 01:47 PM

Does anyone know where these bumper grill inserts are from? They’re the vents next to the turn signals in the bumper.

https://www.instagram.com/p/B20dEOOH...=19odnobnn1q9v

Super_OK_S13 · 02-27-2021, 02:19 PM

Quote:

Originally Posted by azngangster2002

Does anyone know where these bumper grill inserts are from? They?re the vents next to the turn signals in the bumper.

https://www.instagram.com/p/B20dEOOH...=19odnobnn1q9v

the name on a box i saw said " POWER DUCT S13" but i cant find ANY info of them online. but they dont make them anymore and were an option from aftermarket companies back then. You can always dm @takao.sekine on instagram and see if you get an answer of how to search them on YAJ or if its something he can help you attain??

***dorkidori_s13*** · 02-27-2021, 07:14 PM

im pretty sure Tomei made those vent inserts WAY back inna day

RedSled · 02-28-2021, 10:46 AM

Quote:

Originally Posted by azngangster2002

Does anyone know where these bumper grill inserts are from? They?re the vents next to the turn signals in the bumper.

https://www.instagram.com/p/B20dEOOH...=19odnobnn1q9v

What corner lights does this car have ?
Find it really different and unique

tuzzio · 03-01-2021, 08:01 AM

Quote:

Originally Posted by RedSled

What corner lights does this car have ?
Find it really different and unique

They look like clear corners that someone painted or used an amber film on to replicate OEM.

deolio · 03-01-2021, 12:06 PM

Quote:

Originally Posted by RedSled

What corner lights does this car have ?
Find it really different and unique

Uras with amber film or paint on the corner.

IchiXD · 03-23-2022, 06:18 PM

Anyone know what front bumper this is?
It was on my 180 from 15+ years ago and I can't find any pictures of it on anything else.

Ph0king · 03-23-2022, 09:06 PM

Quote:

Originally Posted by IchiXD

Anyone know what front bumper this is?
It was on my 180 from 15+ years ago and I can't find any pictures of it on anything else.

Top Secret

cbrnoob · 09-02-2022, 04:15 AM

Can anyone identify this front bumper please??

BryanSayWhat · 09-02-2022, 11:03 AM

Quote:

Originally Posted by cbrnoob

Can anyone identify this front bumper please?

Vanquish:

Agamemnon · 10-16-2022, 12:40 PM

Can anyone help ID these screws and washer combos? I found these in my misc Nissan nut and bolt jar and for the life of me can't pinpoint were they came from. I know I wouldn't have put them in with the rest of my cars extra nuts and bolts unless I thought they came from the car. Has anyone seen these before on a S14? Thanks.

burnsauto · 10-16-2022, 05:05 PM

on the s14 they used those screws, minus the washer, on the reveal moldings. With the washer I've seen them used on 300zx fender liners. Those have a black oxide finish, which they usually use on exterior trim.

Agamemnon · 10-16-2022, 06:41 PM

Quote:

Originally Posted by burnsauto

With the washer I've seen them used on 300zx fender liners. Those have a black oxide finish, which they usually use on exterior trim.

BINGO! Part number 01461-00243.
Thanks for the help Amigo!

harrypotter · 06-26-2023, 02:38 PM

s13 hatch rear valance I got in Okinawa in 2010.....any idea who made this?

I think it might be G-Grow.....but cant find pictures of them to see if they put makers marks on them anywhere

https://imgur.com/a/9Oh6tBq

***dorkidori_s13*** · 06-26-2023, 10:56 PM

Quote:

Originally Posted by harrypotter

s13 hatch rear valance I got in Okinawa in 2010.....any idea who made this?

I think it might be G-Grow.....but cant find pictures of them to see if they put makers marks on them anywhere

https://imgur.com/a/9Oh6tBq

its g-grow. hotroad was a lot more aggressive (hotroad was built off the g-grow valance)

thermogod · 07-13-2023, 07:39 PM

what in the world are these side skirts and bumper? i remember seeing the bumper in this thread at some point. guy had these in his attic for "10 years" he said - right before i picked them up for $100.

the "vent" in the skirts has actual mesh in it. the non-vent side of the skirts doesn't look like Origin Lab to me. yes, i asked fb groups and all my s-chassis friends.

[IMG]

[/IMG]

AKADriver · 07-13-2023, 08:20 PM

EVERYONE had this kit in the early 2000s...

https://visracing.com/i-30504415-198...-full-kit.html

http://www.showcars-bodyparts.com/24...0Kit%202BC.jpg

I don't recall where it actually originated but lots of companies made copies. This was at the height of the body kit craze when the scene in the US was just starting to shift from the whole Wings West etc style to "JDM" parts but I couldn't tell ya if this kit was originally Japanese or American designed.

***dorkidori_s13*** · 07-13-2023, 10:53 PM

its the old Erebuni S13 "NISMO" kit. has been around for damn near ever. ive got the bumper, skirts and valances sitting in my storage unit. was gonna bring the kit back, but i dont think the ROI would be there at all given how poorly anything sells anymore outside of OEM style stuff.

PS: i responded in one of your FB posts.

thermogod · 07-14-2023, 04:59 AM

Quote:

Originally Posted by AKADriver

EVERYONE had this kit in the early 2000s...

https://visracing.com/i-30504415-198...-full-kit.html

http://www.showcars-bodyparts.com/24...0Kit%202BC.jpg

I don't recall where it actually originated but lots of companies made copies. This was at the height of the body kit craze when the scene in the US was just starting to shift from the whole Wings West etc style to "JDM" parts but I couldn't tell ya if this kit was originally Japanese or American designed.

Quote:

Originally Posted by dorkidori_s13

its the old Erebuni S13 "NISMO" kit. has been around for damn near ever. ive got the bumper, skirts and valances sitting in my storage unit. was gonna bring the kit back, but i dont think the ROI would be there at all given how poorly anything sells anymore outside of OEM style stuff.

PS: i responded in one of your FB posts.

thank you gentlemen. any idea how much they would be worth now? painted and in mint condition?

***dorkidori_s13*** · 07-14-2023, 10:00 AM

Quote:

Originally Posted by thermogod

thank you gentlemen. any idea how much they would be worth now? painted and in mint condition?

not much. i bought the entire kit brand new shipped to me off ebay back in 2021 for around $900 IIRC. its nothing special. chinese made... and fitment is very poor on front bumper (havent tried skirts or valances yet, buuuuuuut pretty sure both would require work to correct).

11-23-2020, 10:55 AM	#13534
*FaLKoN240* Super Moderator Join Date: Jun 2004 Location: SoCal Temecula Posts: 16,893 Trader Rating: (73) Feedback Score: 73 reviews	Leave it there next time. __________________ Best way to do business with me? Make your best offer FIRST.

12-17-2020, 10:50 PM	#13536
shobotan Join Date: Jan 2011 Location: Emerald City, Straya Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	^If my HyperRev is to be believed that bar is from a company called Avance/Amphini Development. __________________ MECHANICAL INJURNEER

02-27-2021, 07:14 PM	#13543
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 43 Posts: 7,496 Trader Rating: (41) Feedback Score: 41 reviews	im pretty sure Tomei made those vent inserts WAY back inna day __________________ Check out my IG for what I'm up to! DORKIDORI INSTAGRAM!!!

09-02-2022, 04:15 AM	#13549
cbrnoob Join Date: Sep 2022 Location: Ireland Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Can anyone identify this front bumper please?? Last edited by cbrnoob; 09-02-2022 at 06:07 AM..

10-16-2022, 05:05 PM	#13552
burnsauto Post Whore! Join Date: Dec 2006 Location: 717, PA Age: 39 Posts: 3,324 Trader Rating: (6) Rides Gallery: burnsauto Feedback Score: 6 reviews	on the s14 they used those screws, minus the washer, on the reveal moldings. With the washer I've seen them used on 300zx fender liners. Those have a black oxide finish, which they usually use on exterior trim. __________________

11-19-2020, 09:57 PM	#13531
LtSlayer Leaky Injector Join Date: Jul 2020 Location: Norco Posts: 69 Trader Rating: (0) Feedback Score: 0 reviews	anyone know what this is from?

12-19-2020, 02:23 AM	#13537
Silv1401 Zilvia Member Join Date: Jan 2019 Location: Vancouver, WA/Portland, OR, USA Posts: 189 Trader Rating: (1) Feedback Score: 1 reviews	Anyone recognize this brand logo? On a pair of fiberglass S14 rear spats I picked up in a package deal. The number on them brings up Land Rover parts, funny enough. Sent from my SM-G950U using Tapatalk

02-27-2021, 01:47 PM	#13541
azngangster2002 Join Date: Mar 2011 Location: north pole Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Does anyone know where these bumper grill inserts are from? They’re the vents next to the turn signals in the bumper. https://www.instagram.com/p/B20dEOOH...=19odnobnn1q9v

03-23-2022, 06:18 PM	#13547
IchiXD Join Date: Apr 2016 Location: Tennessee Posts: 9 Trader Rating: (1) Feedback Score: 1 reviews	Anyone know what front bumper this is? It was on my 180 from 15+ years ago and I can't find any pictures of it on anything else.

10-16-2022, 12:40 PM	#13551
Agamemnon Post Whore! Join Date: Sep 2003 Location: Lake Stevens, WA Age: 42 Posts: 2,667 Trader Rating: (20) Feedback Score: 20 reviews	Can anyone help ID these screws and washer combos? I found these in my misc Nissan nut and bolt jar and for the life of me can't pinpoint were they came from. I know I wouldn't have put them in with the rest of my cars extra nuts and bolts unless I thought they came from the car. Has anyone seen these before on a S14? Thanks.

06-26-2023, 02:38 PM	#13554
harrypotter Zilvia Addict Join Date: Jun 2010 Location: Panama City FL Posts: 626 Trader Rating: (19) Feedback Score: 19 reviews	s13 hatch rear valance I got in Okinawa in 2010.....any idea who made this? I think it might be G-Grow.....but cant find pictures of them to see if they put makers marks on them anywhere https://imgur.com/a/9Oh6tBq __________________ Last edited by harrypotter; 06-26-2023 at 03:12 PM..

07-13-2023, 07:39 PM	#13556
thermogod Leaky Injector Join Date: Apr 2023 Location: away from anything with a roof Posts: 135 Trader Rating: (0) Feedback Score: 0 reviews	what in the world are these side skirts and bumper? i remember seeing the bumper in this thread at some point. guy had these in his attic for "10 years" he said - right before i picked them up for $100. the "vent" in the skirts has actual mesh in it. the non-vent side of the skirts doesn't look like Origin Lab to me. yes, i asked fb groups and all my s-chassis friends. [IMG][/IMG] __________________ *yeah, that's a great steak, but it's not Cypher's steak.*

07-13-2023, 08:20 PM	#13557
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 43 Posts: 3,517 Trader Rating: (1) Feedback Score: 1 reviews	EVERYONE had this kit in the early 2000s... https://visracing.com/i-30504415-198...-full-kit.html http://www.showcars-bodyparts.com/24...0Kit%202BC.jpg I don't recall where it actually originated but lots of companies made copies. This was at the height of the body kit craze when the scene in the US was just starting to shift from the whole Wings West etc style to "JDM" parts but I couldn't tell ya if this kit was originally Japanese or American designed.

07-13-2023, 10:53 PM	#13558
*dorkidori_s13* ITS LISA'S FAULT!!! Join Date: Jun 2003 Location: Las Vegas Age: 43 Posts: 7,496 Trader Rating: (41) Feedback Score: 41 reviews	its the old Erebuni S13 "NISMO" kit. has been around for damn near ever. ive got the bumper, skirts and valances sitting in my storage unit. was gonna bring the kit back, but i dont think the ROI would be there at all given how poorly anything sells anymore outside of OEM style stuff. PS: i responded in one of your FB posts. __________________ Check out my IG for what I'm up to! DORKIDORI INSTAGRAM!!!