bucking when going into boost

[slider2828]

Originally Posted by jr_ss

The ECU sends a signal to the power transistor or ignitor, which then tells the coil to fire. 12V and ground are supplied to the coil already, once via the Ignition relay, the other ground does not pass through a relay.

What if you eliminated the ignitor and just wired this through, and used a VQ coil or an R8 Coil..... what happens then?

[jr_ss]

Originally Posted by slider2828

What if you eliminated the ignitor and just wired this through, and used a VQ coil or an R8 Coil..... what happens then?

The ECU is still telling the coil (built in to the COP) to fire. 12v is still supplied by the ignition relay.

[slider2828]

Originally Posted by jr_ss

The ECU is still telling the coil (built in to the COP) to fire. 12v is still supplied by the ignition relay.

Ahhh cool appreciate it... thats cool