S14 hvac/climate control bulbs? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Chief 1402 · 01-24-2024, 09:39 AM

Hey guys, trying to ?restore? my climate control unit on my s14 I got not too long ago. I?ve got white leds for the 3 twist bulbs, they work great. But I?ve noticed some of my push button lights don?t work. There are 5 green bulbs and 1 orange bulb that indicate which mode of air you?ve selected as well as ac or recirculating.

Has anyone replaced these bulbs? If so, what bulbs did you use??

I reached out to super bright leds but they only had 1 bulb they thought might work, but they don?t have green or orange. https://www.superbrightleds.com/led-...s-12v-dimmable

Pictures of the bulbs on my climate control:

DEGUZZI · 01-24-2024, 05:55 PM

Could try reaching out to restomodninja

Last time I ordered, they had bulbs I needed for my S13 climate control and dashboard buttons

Chief 1402 · 01-24-2024, 06:43 PM

Quote:

Originally Posted by DEGUZZI

Could try reaching out to restomodninja

Last time I ordered, they had bulbs I needed for my S13 climate control and dashboard buttons

Thanks for the suggestion, I messaged them.

AKADriver · 01-31-2024, 07:18 PM

Those are LEDs already, old school thru hole panel LEDs. There are probably current limiting resistors on the board and they're just 'bare' 1.8v red and 2.2v green given the technology of the time. The lollipop shape is kind of unusual, to find an exact match you'd probably need to order from something like digikey.

I searched digikey for LEDs, rectangular with domed top, through-hole, and I bet these are a match:

https://www.digikey.com/en/products/...169XGD/3084120

https://www.digikey.com/en/products/...169XID/3084121

Measure yours to see if they're 3mm x 2mm, if they are these will almost certainly work.

Mouser also has them

https://www.mouser.com/ProductDetail...heCe0ckA%3D%3D

https://www.mouser.com/ProductDetail...iggkw3fg%3D%3D

Chief 1402 · 02-01-2024, 05:02 PM

Hey, when I measured them they were 11mm long, 6mm wide, 3mm “thick”. I basically gave up on finding new ones, and put the unit back together. Plus I don’t want to break the board or anything trying to take the bulbs out and put new ones on.

AKADriver · 02-01-2024, 08:06 PM

Hm yeah. Tough to find that combination of size and shape. If you were local I'd be happy to fix it for you if I could find the right LEDs, through hole soldering is cake. Easiest way might be to get a 6mm round dome LED and shave two sides down haha.

01-24-2024, 09:39 AM	#1
Chief 1402 Zilvia Addict Join Date: Sep 2014 Location: Huntsville, AL Age: 30 Posts: 871 Trader Rating: (23) Feedback Score: 23 reviews	S14 hvac/climate control bulbs? Hey guys, trying to ?restore? my climate control unit on my s14 I got not too long ago. I?ve got white leds for the 3 twist bulbs, they work great. But I?ve noticed some of my push button lights don?t work. There are 5 green bulbs and 1 orange bulb that indicate which mode of air you?ve selected as well as ac or recirculating. Has anyone replaced these bulbs? If so, what bulbs did you use?? I reached out to super bright leds but they only had 1 bulb they thought might work, but they don?t have green or orange. https://www.superbrightleds.com/led-...s-12v-dimmable Pictures of the bulbs on my climate control:

01-24-2024, 05:55 PM	#2
DEGUZZI Zilvia Member Join Date: May 2010 Location: Lakewood, CA Posts: 205 Trader Rating: (3) Feedback Score: 3 reviews	Could try reaching out to restomodninja Last time I ordered, they had bulbs I needed for my S13 climate control and dashboard buttons __________________ IG: de_guzzi // Build Thread

01-31-2024, 07:18 PM	#4
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 43 Posts: 3,517 Trader Rating: (1) Feedback Score: 1 reviews	Those are LEDs already, old school thru hole panel LEDs. There are probably current limiting resistors on the board and they're just 'bare' 1.8v red and 2.2v green given the technology of the time. The lollipop shape is kind of unusual, to find an exact match you'd probably need to order from something like digikey. I searched digikey for LEDs, rectangular with domed top, through-hole, and I bet these are a match: https://www.digikey.com/en/products/...169XGD/3084120 https://www.digikey.com/en/products/...169XID/3084121 Measure yours to see if they're 3mm x 2mm, if they are these will almost certainly work. Mouser also has them https://www.mouser.com/ProductDetail...heCe0ckA%3D%3D https://www.mouser.com/ProductDetail...iggkw3fg%3D%3D

02-01-2024, 05:02 PM	#5
Chief 1402 Zilvia Addict Join Date: Sep 2014 Location: Huntsville, AL Age: 30 Posts: 871 Trader Rating: (23) Feedback Score: 23 reviews	Hey, when I measured them they were 11mm long, 6mm wide, 3mm “thick”. I basically gave up on finding new ones, and put the unit back together. Plus I don’t want to break the board or anything trying to take the bulbs out and put new ones on.

02-01-2024, 08:06 PM	#6
AKADriver Post Whore! Join Date: May 2002 Location: Springfield, VA Age: 43 Posts: 3,517 Trader Rating: (1) Feedback Score: 1 reviews	Hm yeah. Tough to find that combination of size and shape. If you were local I'd be happy to fix it for you if I could find the right LEDs, through hole soldering is cake. Easiest way might be to get a 6mm round dome LED and shave two sides down haha.