Lower alternator/starter harness - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

papershot · 04-04-2005, 10:32 PM

phase2 says:
"Transmission harness does not needs to be send in, it's a separate circuit that does not need wiring at all. You just need to swap the sensors from the KA tranny to the SR tranny and everything will be plug and play for the transmission neutral position switch and reverse switch. Don't forget to swap the speed sensor."

didn't even have to search for that one.

04-04-2005, 10:32 PM	#1
papershot Zilvia Junkie Join Date: May 2004 Location: CT Posts: 368 Trader Rating: (0) Feedback Score: 0 reviews	phase2 says: "Transmission harness does not needs to be send in, it's a separate circuit that does not need wiring at all. You just need to swap the sensors from the KA tranny to the SR tranny and everything will be plug and play for the transmission neutral position switch and reverse switch. Don't forget to swap the speed sensor." didn't even have to search for that one.