Blow through MAF... Productive??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dizoita · 04-13-2005, 09:37 PM

Blow through is the best setup in the WORLD period on a KA-T!!!!

I just finished one with a built motor and t3/t4 and FMIC. The car started and drove right after I put the wrench down, never stalled once or did anything unusual. With 10psi 240whp, on the rich side and little late timming.

I was very surprised at how well in ran/idled right after coming off boost

Open waste gate is

04-13-2005, 09:37 PM	#4
dizoita Join Date: Jan 2003 Location: tampa fl Posts: 49 Trader Rating: (0) Feedback Score: 0 reviews	Blow through is the best setup in the WORLD period on a KA-T!!!! I just finished one with a built motor and t3/t4 and FMIC. The car started and drove right after I put the wrench down, never stalled once or did anything unusual. With 10psi 240whp, on the rich side and little late timming. I was very surprised at how well in ran/idled right after coming off boost Open waste gate is