gauge cluster wiring??? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

the head · 04-26-2005, 08:37 AM

jesus... since you have heard about this problem befor means it has been discussed before therefore you should search before talking.

since you obviously suck at the internet I will help ya out

the difference is in the tach...the signal it reads is different

if the cluster is the same (analog to analog or HUD to HUD) than it plugs right in but will read in KPH not MPH

you can also swap the tach into your current housing that way you can keep a US speedo and use the proper tach

lastly if the clusters dont match (going analog to HUD or vice versa) you need the subharness that hooks the dash to the main harness this connects with two white plugs under the vent area in the center of the dash

04-26-2005, 08:37 AM	#1
the head Nissanaholic! Join Date: Jul 2002 Location: in a dark room mastering the art of typing with one hand Posts: 2,164 Trader Rating: (3) Feedback Score: 3 reviews	jesus... since you have heard about this problem befor means it has been discussed before therefore you should search before talking. since you obviously suck at the internet I will help ya out the difference is in the tach...the signal it reads is different if the cluster is the same (analog to analog or HUD to HUD) than it plugs right in but will read in KPH not MPH you can also swap the tach into your current housing that way you can keep a US speedo and use the proper tach lastly if the clusters dont match (going analog to HUD or vice versa) you need the subharness that hooks the dash to the main harness this connects with two white plugs under the vent area in the center of the dash __________________ I never knew you could do that with an eggplant