G2871R and Os Gilken twin plate *some Q* - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Mike Wazowski · 05-16-2005, 04:52 PM

Quote:

Originally Posted by fliprayzin240sx

Whats the stock boost for the actuators on the GT2871R?
Lastly, to anybody running this clutch *if any* I know you have to run a smaller TOB but for some reason, it still seems to be preloaded so clutch is slipping. Did anybody have this same problem or any suggestion on how to fix it?

did you get a new sleeve too or just a smaller TOB?

*fliprayzin240sx* · 05-17-2005, 01:16 AM

Quote:

Originally Posted by Mike Wazowski

did you get a new sleeve too or just a smaller TOB?

Well I got the shorter TOB, but the clutch is still preloading. I was browsing around Venus today and found 2 TOBs. One was shorter than the other so

, imma run the shorter carrier with the shorter TOB. Hopefully thatll solve that problem. But anyways....GT2871R boost setting???

BillKlineVT · 05-17-2005, 12:02 PM

there really isnt a "stock" boost on the actuators since they are adjustable, but I'd say the lowest you can go is around 9 psi, which is where I'm at right now, and that is with very little room left on the actuator rod, so I wouldn't go any further to try to make lower boost.

05-17-2005, 12:02 PM	#3
BillKlineVT Zilvia Member Join Date: Nov 2002 Location: Vermont / Virginia Tech Age: 40 Posts: 175 Trader Rating: (0) Feedback Score: 0 reviews	there really isnt a "stock" boost on the actuators since they are adjustable, but I'd say the lowest you can go is around 9 psi, which is where I'm at right now, and that is with very little room left on the actuator rod, so I wouldn't go any further to try to make lower boost.