Fly wheel Resurfacing? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

yenpit · 03-22-2002, 10:20 AM

always resurface a flywheel when putting in a new clutch! especially after abusing it by doing lots of burnouts!!  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt='

'>  u can just use a da disc on a drill to "break" the glaze that is inevitably on the disc surface of the flywheel, but resurfacing at a machine shop is the best way. usually only $30 or so <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/satisfied.gif" border="0" valign="absmiddle" alt=':satisfied:'> good luck!

03-22-2002, 10:20 AM	#5
yenpit Zilvia Addict Join Date: Sep 2001 Location: Holland Michigan Posts: 798 Trader Rating: (0) Feedback Score: 0 reviews	*always* resurface a flywheel when putting in a new clutch! *especially* after abusing it by doing lots of burnouts!!  <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=''>  u can just use a da disc on a drill to "break" the glaze that is inevitably on the disc surface of the flywheel, but resurfacing at a machine shop is the best way. usually only $30 or so <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/satisfied.gif" border="0" valign="absmiddle" alt=':satisfied:'> good luck! __________________ '98 240SX 5spd[br]http://www.speedwisemotorsports.com