Motor Mounts and T/C Rods with PICS THAT WORK!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Thieu · 08-10-2005, 09:13 AM

My old Motor Mounts (both motor + tranny). Can only be used to fill with poly as they are shot. I'm looking to get $50 shipped.

A set of heim joint/pillow ball t/c rods (the blue ones from ebay.. forget the brand). Not in perfect condition, but work flawlessly (were on car for 8 months). Looking to get $100 shipped.

One of the studs on one of the t/c rod is stripped out. It's basically a car wheel stud. You can still tighten it on the car without a problem, but you need to hold the head of the stud while doing so.

Thieu · 08-11-2005, 09:05 AM

I'm knocking $10 off on each.

So $90 shipped for the rods and $40 shipped for the mounts.

pr240sx · 08-11-2005, 09:46 AM

Does the mounts are ok or are shot?

ren · 08-11-2005, 09:48 AM

well. some people give away motor mounts. 40 dollars seems too much for "shot mounts"

Thieu · 08-11-2005, 01:05 PM

the mounts are shot..

how 'bout I fill 'em with poly and then sell them for $40?

pr240sx · 08-11-2005, 01:29 PM

But they still in one piece right?

Thats the idea

Thieu · 08-11-2005, 02:03 PM

oh yeah... all in one piece and I cleaned them/degreased them, so they look great. The rubber is just old.

08-10-2005, 09:13 AM	#1
Thieu Zilvia Member Join Date: Sep 2003 Location: tx Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	Motor Mounts and T/C Rods with PICS THAT WORK!!! My old Motor Mounts (both motor + tranny). Can only be used to fill with poly as they are shot. I'm looking to get $50 shipped. A set of heim joint/pillow ball t/c rods (the blue ones from ebay.. forget the brand). Not in perfect condition, but work flawlessly (were on car for 8 months). Looking to get $100 shipped. One of the studs on one of the t/c rod is stripped out. It's basically a car wheel stud. You can still tighten it on the car without a problem, but you need to hold the head of the stud while doing so. __________________ 90 240sx daily driver/project car "SOHC it to me" Last edited by Thieu; 08-10-2005 at 03:41 PM..

08-11-2005, 09:05 AM	#2
Thieu Zilvia Member Join Date: Sep 2003 Location: tx Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	I'm knocking $10 off on each. So $90 shipped for the rods and $40 shipped for the mounts. __________________ 90 240sx daily driver/project car "SOHC it to me"

08-11-2005, 01:05 PM	#5
Thieu Zilvia Member Join Date: Sep 2003 Location: tx Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	the mounts are shot.. how 'bout I fill 'em with poly and then sell them for $40? __________________ 90 240sx daily driver/project car "SOHC it to me"

08-11-2005, 02:03 PM	#7
Thieu Zilvia Member Join Date: Sep 2003 Location: tx Posts: 199 Trader Rating: (0) Feedback Score: 0 reviews	oh yeah... all in one piece and I cleaned them/degreased them, so they look great. The rubber is just old. __________________ 90 240sx daily driver/project car "SOHC it to me"

08-11-2005, 09:46 AM	#3
pr240sx Zilvia Addict Join Date: Jan 2002 Posts: 627 Trader Rating: (0) Feedback Score: 0 reviews	Does the mounts are ok or are shot?

08-11-2005, 09:48 AM	#4
ren Leaky Injector Join Date: Oct 2004 Location: Philly PA Posts: 73 Trader Rating: (0) Feedback Score: 0 reviews	well. some people give away motor mounts. 40 dollars seems too much for "shot mounts"

08-11-2005, 01:29 PM	#6
pr240sx Zilvia Addict Join Date: Jan 2002 Posts: 627 Trader Rating: (0) Feedback Score: 0 reviews	But they still in one piece right? Thats the idea