silkroad manifold? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

loveless · 08-20-2005, 10:27 AM

I hope I posted in the right section.

I bought a dc one and it has too many weld slag in it

recently, on nico there is a thread where SSA manifold had pieces fallen off and destroyed a new turbo

so I want to spend alittle more and get a manifold that's around 500$. I am looking at the tublar silkroad manifold, it seems to be aroudn that price but I can not find any photos of the runners.... do you guys have pics of the actual runners? or those who have experience with it, what did you think?

wootwoot · 08-20-2005, 10:54 AM

The only manifold worth getting is fullrace, it will cost 300 dollars more than the SilkRoad but do it. It will not crack and then if by some freak occurence it does crack, its in America and under warranty.

trackstar · 08-20-2005, 01:35 PM

Not to hijack your thread, but I'm kind of curious about this myself. I have to replaced my turbo gasket so it occured to me, maybe I should buy a new manifold

The disparities in pricing among manifolds are amazing. Megan manifolds are like $170, there are a few in the $500 range, and quite a few in the $1k range. I don't see an significant differences although I'm sure there are workmanship issues. I dunno.

Var · 08-20-2005, 01:48 PM

Quote:

Originally Posted by trackstar

I don't see an significant differences although I'm sure there are workmanship issues. I dunno.

You dont hang around the forums much then. Cheap mani's simply dont last as long. And the better ones are flow tested and will perform better. If i was ever gonna buy a turbo mani for whatever reason, it would be Full-Race.

loveless · 08-21-2005, 02:24 PM

is this the FUll-race you're talking about? if so, wow this is what I been looking for though the price is a bit high, I am willing to spend that much money but I am not sure if I need it, it's almost an overkill

how does it compare to hks, greddy, jic?

by the way, since this is my daily driver, I am only after 300 to 350whp, do I really need such a nice manifold? (to go with a gt2871r .65 t26 flange planning to run 15psi on it, stock internal, not even head gasket)

420sx · 08-21-2005, 04:00 PM

just buy a megan one, if it cracks get it welded. so fuckin what

Jcb890 · 08-21-2005, 05:37 PM

gotta love all the super cheap 240sx guys... if you have the money, do it once and do it right. don't bother buying a manifold thats gonna crack and you'll need to buy a new one, which could come out to the same price in the end, much more headache, and less power.

eyustfu · 08-21-2005, 05:41 PM

thats exactly how i see things too, do it right the first time so you don't have to re-do things later

wootwoot · 08-21-2005, 08:37 PM

I have heard of every name brand manifold cracking at one point or another. That is THE best bottom mount manifold available and yes it is expensive because it is damn worth it. Buy a 600 dollar manifold which might crack at some time and you are shit outta luck or throw it all down. Its what I'm saving for and I'm only going for 300whp. My turbo is going to barely have to do anything after all these supporting mods I get

loveless · 08-21-2005, 09:19 PM

hm I might buy it then

I'll look into it soon

the reason why I don't want to go cheap is because someone on nico just blew a brand new turbo because the SSA manifold have a chunk of metal fall off and got sucked into the turbine

420sx · 08-22-2005, 11:45 AM

it cracked because u didnt brace it. brace it and it will be ok. megan will last that way a while. or get it jet hot coated, my friend did and its excelent. jdm go fuck yourself.

infinitexsound · 08-23-2005, 01:06 AM

^ i love this guy, dont get me wrong but dont tubular manis crack from road vibration... wouldnt it be smart to get solid engine mounts?

420sx · 08-23-2005, 10:23 AM

well the thing is - all manifolds crack.

its a matter of 1)material used. usially from the SAME supplier

LOL. 2) quality. some things as you all know are made in the SAME factory.... but yea some are more quality i'm sure 3) BRACING.

ANY manifold will crack

deal with it! if my shit cracks when i get one, i just take it off, walk 2 blocks and get it welded. tada. just because its Jic Jdm dont mean it dont crack.

stock sr mani will never crack on u. well....almost never. everything has a life span

420sx · 08-23-2005, 10:25 AM

solid mounts are more money to throw away

Stock mounts plus PB!!! polyurethane is some solid stuff. and cost like 6 bux total to do all 3 mounts, engine and tranny. dont do it if you will cry when you hear interior pieces rattle alot. and get questions like why the fuck your steering wheel is shaking???

08-20-2005, 10:27 AM	#1
loveless Zilvia Member Join Date: Aug 2004 Location: socal Age: 43 Posts: 236 Trader Rating: (0) Feedback Score: 0 reviews	silkroad manifold? I hope I posted in the right section. I bought a dc one and it has too many weld slag in it recently, on nico there is a thread where SSA manifold had pieces fallen off and destroyed a new turbo so I want to spend alittle more and get a manifold that's around 500$. I am looking at the tublar silkroad manifold, it seems to be aroudn that price but I can not find any photos of the runners.... do you guys have pics of the actual runners? or those who have experience with it, what did you think?

08-20-2005, 10:54 AM	#2
wootwoot Post Whore! Join Date: Jan 2004 Location: sarasota florida biatch Age: 39 Posts: 3,850 Trader Rating: (0) Feedback Score: 0 reviews	The only manifold worth getting is fullrace, it will cost 300 dollars more than the SilkRoad but do it. It will not crack and then if by some freak occurence it does crack, its in America and under warranty. __________________ I'm from Florida so I'm probably a bit more strange than you

08-21-2005, 04:00 PM	#6
420sx Post Whore! Join Date: Jun 2004 Location: Texas Age: 42 Posts: 3,960 Trader Rating: (0) Rides Gallery: 420sx Feedback Score: 0 reviews	just buy a megan one, if it cracks get it welded. so fuckin what __________________ hydropgrahics! ls1......

08-21-2005, 08:37 PM	#9
wootwoot Post Whore! Join Date: Jan 2004 Location: sarasota florida biatch Age: 39 Posts: 3,850 Trader Rating: (0) Feedback Score: 0 reviews	I have heard of every name brand manifold cracking at one point or another. That is THE best bottom mount manifold available and yes it is expensive because it is damn worth it. Buy a 600 dollar manifold which might crack at some time and you are shit outta luck or throw it all down. Its what I'm saving for and I'm only going for 300whp. My turbo is going to barely have to do anything after all these supporting mods I get __________________ I'm from Florida so I'm probably a bit more strange than you

08-22-2005, 11:45 AM	#11
420sx Post Whore! Join Date: Jun 2004 Location: Texas Age: 42 Posts: 3,960 Trader Rating: (0) Rides Gallery: 420sx Feedback Score: 0 reviews	it cracked because u didnt brace it. brace it and it will be ok. megan will last that way a while. or get it jet hot coated, my friend did and its excelent. jdm go fuck yourself. __________________ hydropgrahics! ls1......

08-20-2005, 01:35 PM	#3
trackstar Leaky Injector Join Date: May 2005 Location: CT Posts: 77 Trader Rating: (0) Feedback Score: 0 reviews	Not to hijack your thread, but I'm kind of curious about this myself. I have to replaced my turbo gasket so it occured to me, maybe I should buy a new manifold The disparities in pricing among manifolds are amazing. Megan manifolds are like $170, there are a few in the $500 range, and quite a few in the $1k range. I don't see an significant differences although I'm sure there are workmanship issues. I dunno.

08-21-2005, 02:24 PM	#5
loveless Zilvia Member Join Date: Aug 2004 Location: socal Age: 43 Posts: 236 Trader Rating: (0) Feedback Score: 0 reviews	is this the FUll-race you're talking about? if so, wow this is what I been looking for though the price is a bit high, I am willing to spend that much money but I am not sure if I need it, it's almost an overkill how does it compare to hks, greddy, jic? by the way, since this is my daily driver, I am only after 300 to 350whp, do I really need such a nice manifold? (to go with a gt2871r .65 t26 flange planning to run 15psi on it, stock internal, not even head gasket)

08-21-2005, 05:37 PM	#7
Jcb890 Zilvia Addict Join Date: Mar 2005 Location: Massachusetts Age: 40 Posts: 852 Trader Rating: (0) Feedback Score: 0 reviews	gotta love all the super cheap 240sx guys... if you have the money, do it once and do it right. don't bother buying a manifold thats gonna crack and you'll need to buy a new one, which could come out to the same price in the end, much more headache, and less power.

08-21-2005, 05:41 PM	#8
eyustfu Zilvia Addict Join Date: Feb 2003 Location: Dallas, Tx Posts: 781 Trader Rating: (2) Feedback Score: 2 reviews	thats exactly how i see things too, do it right the first time so you don't have to re-do things later

08-21-2005, 09:19 PM	#10
loveless Zilvia Member Join Date: Aug 2004 Location: socal Age: 43 Posts: 236 Trader Rating: (0) Feedback Score: 0 reviews	hm I might buy it then I'll look into it soon the reason why I don't want to go cheap is because someone on nico just blew a brand new turbo because the SSA manifold have a chunk of metal fall off and got sucked into the turbine

08-23-2005, 01:06 AM	#12
infinitexsound Post Whore! Join Date: Sep 2003 Location: INtraweb Age: 42 Posts: 3,522 Trader Rating: (0) Feedback Score: 0 reviews	^ i love this guy, dont get me wrong but dont tubular manis crack from road vibration... wouldnt it be smart to get solid engine mounts?

08-23-2005, 10:23 AM	#13
420sx Post Whore! Join Date: Jun 2004 Location: Texas Age: 42 Posts: 3,960 Trader Rating: (0) Rides Gallery: 420sx Feedback Score: 0 reviews	well the thing is - all manifolds crack. its a matter of 1)material used. usially from the SAME supplier LOL. 2) quality. some things as you all know are made in the SAME factory.... but yea some are more quality i'm sure 3) BRACING. ANY manifold will crack deal with it! if my shit cracks when i get one, i just take it off, walk 2 blocks and get it welded. tada. just because its Jic Jdm dont mean it dont crack. stock sr mani will never crack on u. well....almost never. everything has a life span __________________ hydropgrahics! ls1......

08-23-2005, 10:25 AM	#14
420sx Post Whore! Join Date: Jun 2004 Location: Texas Age: 42 Posts: 3,960 Trader Rating: (0) Rides Gallery: 420sx Feedback Score: 0 reviews	solid mounts are more money to throw away Stock mounts plus PB!!! polyurethane is some solid stuff. and cost like 6 bux total to do all 3 mounts, engine and tranny. dont do it if you will cry when you hear interior pieces rattle alot. and get questions like why the fuck your steering wheel is shaking??? __________________ hydropgrahics! ls1......