FS: 97 KA24DE + 5 speed. 80K miles. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Kreator · 05-24-2005, 08:49 AM

80K miles on both. Tranny is in great shape - always shifted properly. No shavings on the drain plug either. The engine runs and drives fine, but is a bit low on compression, so it doesn't pull that strong. It has been like that since when i bought it 3 years ago (speculation is bad rings) and drove without any issues untill may of this year when it was finally pulled. This is would be a good engine to build, considering (relatively) low miles on block and head. Engine will come with ps pump, oil and water pumps, starter and manifolds. pretty much everything, except for harness, ecu and a/c system. the oil pan has been ghetto tapped for oil return back in the day of my turbo project (which only ran for like a couple days), and i can either weld it shut, or weld a new bung for a mere $10 with a kickass MIG welder my friend now owns.

Asking: $200 for tranny, $100 for engine. $250 for both. Shoot some offers, i need to get this thing out of my carport.

This is located in Silver Spring, MD, and i can deliver it within 40-50 miles for $50.

I can be reached through email or pm, or just post here as i check this board fairly often. Please, serious inquiries only. couple people already backed out after asking me to hold it for them.

PS: also have a 98 5-speed ecu for $75 shipped if anyone's interrested

DrIvEsldEwAyS · 05-24-2005, 01:13 PM

you said it does come with harnesses and ecu? if so aim drivesLdeways

Kreator · 05-24-2005, 01:35 PM

no there is no harness
ecu is available seperatly for $75 shipped.

btw, this is more targetted towards local folks in va/md/pa since i dunnow anything about how to ship this thing plus the price is going to be as much as the engine's worth.

dontworrybout it · 05-24-2005, 02:01 PM

very interested in '98 5-speed ecu. Will have money by friday. Let me know. Thanks.

GBSilviaS15 · 05-24-2005, 02:45 PM

Interested in the tranny. How much + shipping to 54311? Email me please. [email protected]

Kreator · 05-24-2005, 08:34 PM

to everyone who wants the tranny shipped: i will call up ups tomorrow see how much it will cost to ship. quick check on shipping to 54311 said it will take a week and will cost ~$80 for ups ground. I'm guessing it won't be more expensive then that.

like i said (and i even HIGHLIGHTED it) the tranny is 200, engine is 100, ecu is 75. Buy 2 get a discount. Buy all 3, get an even bigger discount. There is like 0% chance of me shipping the engine though.

dontworrybout it: pm/email me when you have the money, i'll tell ya if i still have the part

higatsuku · 05-25-2005, 12:57 AM

I would love to buy the engine, but I live in buffalo

Nitrus0nous · 05-25-2005, 01:34 PM

is the tranny still available? if so i might be up for gettin it today. i need one asap

Kreator · 06-03-2005, 10:12 PM

hmm a little bump as some of the people who were interrested seem to not be responding again...
i looked around, and i think i can go $220 shipped for the transmission.

lc1231 · 09-13-2005, 04:40 PM

$220 shipped for the transmission? do you still have it
does it grind in any gears?
please email to : [email protected]
thanks

vinhisbored · 09-13-2005, 07:21 PM

Dude, why are you bumping a thread that's 3+ months old? He has a more current thread where he parted out the motor.

05-24-2005, 08:49 AM	#1
Kreator Nissanaholic! Join Date: Mar 2002 Location: MD Age: 41 Posts: 1,975 Trader Rating: (0) Feedback Score: 0 reviews	FS: 97 KA24DE + 5 speed. 80K miles. 80K miles on both. Tranny is in great shape - always shifted properly. No shavings on the drain plug either. The engine runs and drives fine, but is a bit low on compression, so it doesn't pull that strong. It has been like that since when i bought it 3 years ago (speculation is bad rings) and drove without any issues untill may of this year when it was finally pulled. This is would be a good engine to build, considering (relatively) low miles on block and head. Engine will come with ps pump, oil and water pumps, starter and manifolds. pretty much everything, except for harness, ecu and a/c system. the oil pan has been ghetto tapped for oil return back in the day of my turbo project (which only ran for like a couple days), and i can either weld it shut, or weld a new bung for a mere $10 with a kickass MIG welder my friend now owns. Asking: $200 for tranny, $100 for engine. $250 for both. Shoot some offers, i need to get this thing out of my carport. This is located in Silver Spring, MD, and i can deliver it within 40-50 miles for $50. I can be reached through email or pm, or just post here as i check this board fairly often. Please, serious inquiries only. couple people already backed out after asking me to hold it for them. PS: also have a 98 5-speed ecu for $75 shipped if anyone's interrested __________________ кто болеет за Зенит, у того всегда стоит! Last edited by Kreator; 05-24-2005 at 01:34 PM..

05-24-2005, 01:13 PM	#2
DrIvEsldEwAyS Zilvia Junkie Join Date: Apr 2005 Location: Columbia,SC Age: 36 Posts: 351 Trader Rating: (0) Feedback Score: 0 reviews	you said it does come with harnesses and ecu? if so aim drivesLdeways __________________ -1990 240sx hatch sr20det- gt35r, blah blah blah

05-24-2005, 01:35 PM	#3
Kreator Nissanaholic! Join Date: Mar 2002 Location: MD Age: 41 Posts: 1,975 Trader Rating: (0) Feedback Score: 0 reviews	no there is no harness ecu is available seperatly for $75 shipped. btw, this is more targetted towards local folks in va/md/pa since i dunnow anything about how to ship this thing plus the price is going to be as much as the engine's worth. __________________ кто болеет за Зенит, у того всегда стоит!

05-24-2005, 08:34 PM	#6
Kreator Nissanaholic! Join Date: Mar 2002 Location: MD Age: 41 Posts: 1,975 Trader Rating: (0) Feedback Score: 0 reviews	to everyone who wants the tranny shipped: i will call up ups tomorrow see how much it will cost to ship. quick check on shipping to 54311 said it will take a week and will cost ~$80 for ups ground. I'm guessing it won't be more expensive then that. like i said (and i even HIGHLIGHTED it) the tranny is 200, engine is 100, ecu is 75. Buy 2 get a discount. Buy all 3, get an even bigger discount. There is like 0% chance of me shipping the engine though. dontworrybout it: pm/email me when you have the money, i'll tell ya if i still have the part __________________ кто болеет за Зенит, у того всегда стоит!

06-03-2005, 10:12 PM	#9
Kreator Nissanaholic! Join Date: Mar 2002 Location: MD Age: 41 Posts: 1,975 Trader Rating: (0) Feedback Score: 0 reviews	hmm a little bump as some of the people who were interrested seem to not be responding again... i looked around, and i think i can go $220 shipped for the transmission. __________________ кто болеет за Зенит, у того всегда стоит!

05-24-2005, 02:01 PM	#4
dontworrybout it Leaky Injector Join Date: May 2004 Location: bay area Posts: 78 Trader Rating: (0) Feedback Score: 0 reviews	very interested in '98 5-speed ecu. Will have money by friday. Let me know. Thanks.

05-24-2005, 02:45 PM	#5
GBSilviaS15 Leaky Injector Join Date: Jan 2005 Location: Wisconsin Posts: 103 Trader Rating: (0) Feedback Score: 0 reviews	Interested in the tranny. How much + shipping to 54311? Email me please. [email protected]

05-25-2005, 12:57 AM	#7
higatsuku Join Date: Aug 2003 Location: Buffalo, NY Age: 43 Posts: 30 Trader Rating: (0) Feedback Score: 0 reviews	I would love to buy the engine, but I live in buffalo

05-25-2005, 01:34 PM	#8
Nitrus0nous Join Date: Jul 2002 Posts: 11 Trader Rating: (0) Feedback Score: 0 reviews	is the tranny still available? if so i might be up for gettin it today. i need one asap

09-13-2005, 04:40 PM	#10
lc1231 Join Date: Jul 2005 Location: mt. view Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	$220 shipped for the transmission? do you still have it does it grind in any gears? please email to : [email protected] thanks

09-13-2005, 07:21 PM	#11
vinhisbored Zilvia FREAK! Join Date: Apr 2005 Location: socal Posts: 1,359 Trader Rating: (15) Feedback Score: 15 reviews	Dude, why are you bumping a thread that's 3+ months old? He has a more current thread where he parted out the motor.