Can't Get the Darn thing Off! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SpeedMonkeyInc · 09-28-2005, 05:17 PM

I just went through the same thing. I used needle nose vise grips, then replaced the screws with normal bolts. Much better now! As big a PITA as those little screws where, nothing like getting the injectors themselvs out! Anyone have any tips on how go get injectors out of the rail without damaging the injector tops?

aznpoopy · 09-28-2005, 06:25 PM

Quote:

Originally Posted by SpeedMonkeyInc

I just went through the same thing. I used needle nose vise grips, then replaced the screws with normal bolts. Much better now! As big a PITA as those little screws where, nothing like getting the injectors themselvs out! Anyone have any tips on how go get injectors out of the rail without damaging the injector tops?

use two wide flat screwdrivers and pry them out. if you are really anal you can wrap the tip with some tissue paper or rubber bands.

projectRDM · 09-28-2005, 06:33 PM

Hose pliers rule for pulling injectors.

09-28-2005, 06:33 PM	#3
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 51 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Hose pliers rule for pulling injectors. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

09-28-2005, 05:17 PM	#1
SpeedMonkeyInc Zilvia FREAK! Join Date: Apr 2003 Location: Oakland Age: 45 Posts: 1,271 Trader Rating: (0) Feedback Score: 0 reviews	I just went through the same thing. I used needle nose vise grips, then replaced the screws with normal bolts. Much better now! As big a PITA as those little screws where, nothing like getting the injectors themselvs out! Anyone have any tips on how go get injectors out of the rail without damaging the injector tops?