Aftermarket Tie Rods... worth it? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

McRussellPants · 01-15-2006, 02:09 PM

SPL All the way.

The Kazama / KTS Outters blow. The rod end is tiny and I've seen the rod on the end bend.

SPL Sells Spacers to go with the Z32 Inners. The SPL Outter Shank is steel and the rod end is huge. It also has the most bumpsteer adjustment out of any of them and comes with machined support washers so the shank wont break.

DJPimpFlex · 01-15-2006, 02:28 PM

Quote:

Originally Posted by McRussellPants

SPL All the way.

The Kazama / KTS Outters blow. The rod end is tiny and I've seen the rod on the end bend.

SPL Sells Spacers to go with the Z32 Inners. The SPL Outter Shank is steel and the rod end is huge. It also has the most bumpsteer adjustment out of any of them and comes with machined support washers so the shank wont break.

What makes you say that? I have the KTS outers and they have been perfect. I suspose they could brake, but only if you hit something. As for the SPL outers they had to much adjustment for a while and they had to recall some of them because of cracking. SPL is a great company so they took care of there customers, but KTS's and Kazamas are be no means crap. You'de be fine going with either.

01-15-2006, 02:09 PM	#1
McRussellPants Nissanaholic! Join Date: Oct 2005 Location: Austin, Tx Posts: 2,168 Trader Rating: (0) Feedback Score: 0 reviews	SPL All the way. The Kazama / KTS Outters blow. The rod end is tiny and I've seen the rod on the end bend. SPL Sells Spacers to go with the Z32 Inners. The SPL Outter Shank is steel and the rod end is huge. It also has the most bumpsteer adjustment out of any of them and comes with machined support washers so the shank wont break.