coolant temp gauge install question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Wiisass · 01-22-2006, 09:50 PM

a regular 12mm socket, 2 6" extentsions, a wobble joint or u-joint and one of those retractable grabbers. It's a lot easier if you don't have the egr hooked up or the extra brackets on the bottom of the mani. With that stuff on there it can be a real pain in the ass, but without it, it's cake besides the heater core lines. But if you ever do have the mani off, i would recommend installing the water temp sensor in the manifold.

01-22-2006, 09:50 PM	#6
Wiisass Zilvia Junkie Join Date: Aug 2002 Location: Philly Posts: 486 Trader Rating: (0) Feedback Score: 0 reviews	a regular 12mm socket, 2 6" extentsions, a wobble joint or u-joint and one of those retractable grabbers. It's a lot easier if you don't have the egr hooked up or the extra brackets on the bottom of the mani. With that stuff on there it can be a real pain in the ass, but without it, it's cake besides the heater core lines. But if you ever do have the mani off, i would recommend installing the water temp sensor in the manifold. __________________ TIP Engineering R/T Tuning Drift and RWD Sport DriftAssNation