Megan RUCA'a=

[Jesster]

thanks fuckers. I'm gonna go slit my wrists with those open welds and cry in a dark corner.

[Full-Lock]

oh fuck

they'll hold

[Bigballin]

Originally Posted by Jesster

thanks fuckers. I'm gonna go slit my wrists with those open welds and cry in a dark corner.

write bigballin on your forehead next to you then take and post pic

[420sx]

lol.... go get them welded up. who gives a shit it will be fine after that. powdercoat them if u want to.

like i said. cheap pays twice.

[aznpoopy]

post it on every car forum you can find.
make sure megan knows about it.
get refund.
then buy something else.

[A Spec Products]

Originally Posted by 420sx

lol.... go get them welded up. who gives a shit it will be fine after that. powdercoat them if u want to.

like i said. cheap pays twice.

yeah, like a friend said, just go to muffler shop, $5 to throw some welds on that biya

then spray paint

done

[homegaragespl]

shoulda got battle version or peak performance. MMMmmMmm....beefy!

[brewster240]

think i can weld these too? mr tie rod ends for s chassis.

put these in on saturday, broke on wednesday. this is the side that their heim joint threads into. i threaded the heim in as far as it could, that tightened down the lock nut.




the hole is now oval, and the threads ripped out. thank god i felt a wobble in the steering (i think thats from when the metal started stretching) and as i was making a right turn in a parking lot after slowing down, the end ripped completly out of the sleeve.

not to mention the heims themselves have a lot of play in them. this is after less then a week, and less the 500 miles.

[markyboi]

damn...^^^is that megan too?

[!Zar!]

Originally Posted by markyboi

damn...^^^is that megan too?

Uhh. Assuming when he said it was, "MR" and last I checked that meant Megan Racing. Then yes. It is megan also.


I'm glad this thread is here. So when people ask for opinions on MR parts. I can show this thread.


But then there are those ever persistent ones who need the actual person who has had one break on them...

Bah. I detest stupid people.


I'm so glad Kuah sells quality parts. Viva la SPL!

[mattack69]

I want to cry at the serious risk of life this company is apparently putting the 240 nation under. Battle RUCA's it is. Those things are like the Angus of RUCA's LOL I hope you get you're moola back home slice!

[!Zar!]

I look at Megan Racing with the glass half full.

It's weeding out all the people who fail at life in the 240 scene.

[HyperTek]

not surprising since alot of small companys that aim for bigtime, usually have thier parts produced by the lowest bidder..

You cant sue em imo lol.. they already gave u the warning "for offroad use only" lol

Tcsportline stuff is prolly a lil better, or even ebay stuff lol.

[brewster240]

being for offroad use only doesnt entitle them to make a crappy, dangerous product. if anything, it should be stronger if its intended for racing as their brand name suggests. my parts failed in under 5 days. thats a faulty product no matter where i was using it.

[!Zar!]

Originally Posted by brewster240

being for offroad use only doesnt entitle them to make a crappy, dangerous product. if anything, it should be stronger if its intended for racing as their brand name suggests. my parts failed in under 5 days. thats a faulty product no matter where i was using it.

Originally Posted by 420sx

yea ever heard a saying....


cheap 240sx owner pays twice.

I'm going to slang this quote the way I slang hoes. Straight across ever block.

Yall don't know.

[240trainee]

They are cheap, looking for overall volume profit, not the benefit of the consumer. There is a reason people are saying to pay for SPL/ Battleversion/ Peak. Quality AND customer service.

Don't expect Megan to give 2 shits about you and their product failing.

[LigouriRd]

Originally Posted by brewster240

think i can weld these too? mr tie rod ends for s chassis.

put these in on saturday, broke on wednesday. this is the side that their heim joint threads into. i threaded the heim in as far as it could, that tightened down the lock nut.




the hole is now oval, and the threads ripped out. thank god i felt a wobble in the steering (i think thats from when the metal started stretching) and as i was making a right turn in a parking lot after slowing down, the end ripped completly out of the sleeve.

not to mention the heims themselves have a lot of play in them. this is after less then a week, and less the 500 miles.

Clearly those are coming off my car, I am not going to chance a failure like that. Fook!

Originally Posted by mach5camaross

You do get what you pay for.

I have megan RUCA's and Toe arms, both have excellent welds, the thread were all good...

I've got the toe rods as well, I don't have a whole lot of choice on those since one of my old ones is bent.

I wasn't going to whine about my experience with Megan till I saw this, but what the hey more fuel to the fire:
I specifically ordered 95-98 toe rods, when I recieved them a) they did not have the dust boot that was pictured and 2) there was a 10 mm difference between the width of the joint and the mounting width in the car. Looking at the packing list showed the part number was for an S-13. So I called them and arranged for them to pick up the S13 arms and send me S14 arms. Two weeks later, box arrived containing S14 Rucas (the welds on those looked ok, but I really didn't look too close). Call em again to pick up the Rucas and again send me S14 TOE CONTROL ARMS. Once I finally recieve the arms I again notice that there is a 10mm difference between the width of the megans and the oems. Again I call them, apparently there are supposed to be spacer washers included with the arms. "Oh, we have been out of stock of those washers lately so we stopped including them with our shipments".
WTF, I just could not believe the idoicraty of this organisation. You are out of stock of a critical component that will make your part fit a specific application so you just don't include that part. Fook em I got some washers from the hardware store, I told the tech that I will never recommend them or buy anything else from them.

[Slidin240Wayz]

Originally Posted by LigouriRd

Call em again to pick up the Rucas and again send me S14 TOE CONTROL ARMS. Once I finally recieve the arms I again notice that there is a 10mm difference between the width of the megans and the oems. Again I call them, apparently there are supposed to be spacer washers included with the arms. "Oh, we have been out of stock of those washers lately so we stopped including them with our shipments".
WTF, I just could not believe the idoicraty of this organisation. You are out of stock of a critical component that will make your part fit a specific application so you just don't include that part. Fook em I got some washers from the hardware store, I told the tech that I will never recommend them or buy anything else from them.

BBB? anyone...

[McRussellPants]

Uhhh, if you don't want shitty service/parts don't pay for shitty service/parts.


lol at people saying megan coils are good. shut the fuck up and drive a car on not garbage can coils.
lol at tack welded RUCA.
lol at this entire thread.

[420sx]

^ the thing is, this thread is important. its an example of WHY you pay for quality....

My friends know me for spending money to get better grade stuff. "baller", "expensive shit". whatever.
I HATE to pay for the same thing twice when once should be enough for a long time...


think of it as.....

You got to pay to play.... then everything will make sence.

[phreze]

420sx you hit it right on the money. Sure $600 coil-overs sound like a good deal untill they break. Then do you spend the $1500 you should have or get a decent set for $1000? Why risk damaging your car and spending more money?

Just save twice, buy once. You will be thankfull in the long run. In this case you would have been thankfull five days latter. Never bought Battle version but from what I hear their customer service is second to none.

[brewster240]

ive had good experience with mr exhausts and such over the last couple years. i figured by now their suspension parts might be at least decent. guess i was wrong. it was worth a shot i guess.

i usually by good stuff for my suspension, i just had these in my daily drive cause it needed rod ends anyway.

oh well.

[420sx]

i think this thread should be linked every time someone questions

PRICE TO QUALITY

relationship.


very good example. its almost instant classic. should make it sticky or faq haha.

[smelly240]

i got one of their exhausts years ag and the mother effer hit the diff and rattled... fuck that noise. Shitstain>megan aspec muffler on ebay catback FTW.

[GSXRJJordan]

I worked at a shop that was sponsored by Megan, so when I first started puttin my car together, I had literally every part they made for the 240/sr20, except the coilovers... now I'm working on replacing it all - seriously. The exhaust manifolds are aiight, the exhaust parts are average (had one elbow split at the weld, laying my nice exhaust on the freeway @ 80mph, but they replaced it all), the intercooler's OK (little big), and the strut bars are, well, what you'd expect. Above all, buyer beware of da cheap shit.