we have a go on the RB swap - Page 5 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*NemeGuero* · 04-25-2006, 04:04 PM

Quote:

Originally Posted by S14DB

It's not the 'flow' from the walbro that the FPR can't handle. It's the 50psi output pressure. The Flow data you listed is 100% duty cycle not idle. Idle is were the fpr is bypassing a lot of fuel. The FPR is designed for 43psi but dealing with 50psi inlet pressure.

All the engines you listed use the same FPR. So, they are all affected by higher PSI regardless of flow.

Does this mean that anyone, regardles of engine, using a walboro needs an aftermarket FPR to compensate for the pressure? Since, you'll be overloading the stock FPR so to speak?

What about FMUs?

***S14DB*** · 04-25-2006, 04:49 PM

Quote:

Originally Posted by NemeGuero

What about FMUs?

Crap...

Good enough to put in a sock and beat you with.

*NemeGuero* · 04-25-2006, 04:51 PM

Quote:

Originally Posted by S14DB

Crap...

Good enough to put in a sock and beat you with.

LOL, ok.. well what about my FPR question?

Tenchuu · 04-25-2006, 10:16 PM

car is messed up i have to move. this makes me sick to do it...
http://www.zilvia.net/f/showthread.p...877#post982877

*NemeGuero* · 04-26-2006, 05:48 AM

Nnnooooo!!!!

Neejay · 04-26-2006, 08:11 AM

Quote:

Originally Posted by Tenchuu

car is messed up i have to move. this makes me sick to do it...
http://www.zilvia.net/f/showthread.p...877#post982877

Damn, are you serious?

Whats wrong with it and why do you have to move? If you dont mind me asking...

Tenchuu · 04-26-2006, 09:21 AM

copied and pasted from the for sale thread

the why on the sell:
I am quitting the millitairy and moveing on monday (may 1)
Moveing to Oregon witch lacks a shop for me to cheaply work on it
car currently barley runs and sounds like a lawnmower
i still have to pack up, move out to another place and clean up my place before monday (currently 1/2 way packed)
I don't have little if any mechanic troubleshooting skills to figure this out, i don't have the cash to pay a mechanic to do this as well as keep full coverage (have to since have loan on car), pay the car payments, pay off the loan for the swap and pay the credit card off for the swap AND buy another vehicle to drive in the mean time while this is down cause i am going to be unemployed for a couple of months while i relocate.

so current bills+mechanic bills+second car payments+moveing-my job=need a reliable vehicle.

Neejay · 04-26-2006, 09:27 AM

Damn...sorry to hear.

Tenchuu · 04-26-2006, 11:05 AM

well it's oficial #5 cyl is flatlined.

**mrmephistopheles** · 04-26-2006, 04:01 PM

i take it your motor is out of warranty from the importer?

Tenchuu · 04-28-2006, 07:23 AM

well as of now the whole car is going to drift freaq to go to (syko performance) for repairs, i could just pay for the repairs and keep it......or sell it running guess it is all up to me to sell shit and raise funds to keep it or toss in the towel and call it a day on the 98RB project. will be deciding soon.

R33GTS-T · 04-28-2006, 07:36 AM

personally i think you have so much time and money invested into this project it would be a damn shame to turn around and sell it....especially if you get it fixed up and running

there's nothing like the sound of an RB25DET

i'll never own another S chassis car w/o and RB in it.....hell even my girl is planning to build an RB25 powered zenki s14 during this coming off season

*NemeGuero* · 04-28-2006, 10:44 AM

Keep it! I'm sure Dave will give you a good/fair deal!

Tenchuu · 04-28-2006, 01:11 PM

dave and gary are great guys, that is why i trust them with the car adn that they are going to do an A+++ job on it. thing is my priorities ar kinda shifting and funding is tight.

and if i keep it i will have to go back down to LA from OR then drive back up to OR again with the gas price at $my left nut/gallon

Tenchuu · 05-05-2006, 12:08 AM

OK car is running fine and has a new longblock in it. altho i am not going to be around to see it, it is going to be sold here soon. this is the end of the RB swap for me. swap was a complete sucess, reliability was a complete failure for me. obviously this isn't the normal as henery and alot of people have perfectly running RB cars that give no problem, but if anyne attempt to do this in the future, i would suggest haveing 2x the needed funds for misc items that don't work, but top of the line shit the first time, and be prepared to buy a new engine or completely go through it the first time.

i learned the lessons everything expensive way. but now with the new motor, a qualified mechanic is going over it, and i will be running fine, and i will never have to see that car ever again. and after all the work and money i put into it i have to say that might be a good thing.

slavetothemuzic · 04-28-2007, 01:40 PM

Quote:

Originally Posted by Tenchuu

am getting about 200miles to the tank (12-14MPG) I have heard that it should get alot better than that

You should definitely be getting better mileage than that. I get higher than that in the city, and mid 20s on the highway. I do recall that running a couple bottles of injector cleaner through not long after the swap helped with my mileage and a minor cold start issue I was having.

Quote:

Originally Posted by Tenchuu

oh and that low speeds thing, at under about 8or so MPH in 1st, and at the low ends of every gear it is a bit jerky, kind of like the clutch is engageing and disengaugeing but i don't think that is the case since as soon as i give it gas it takes off with the quickness. once i get above parkinglot cruising speeds it wants to go like it's cool.

Not sure about the jerkyness. Mine is completely smooth unless it's my fault. I have an Exedy clutch and it's pretty grabby.

Tenchuu · 04-28-2007, 02:42 PM

Quote:

Originally Posted by slavetothemuzic

You should definitely be getting better mileage than that. I get higher than that in the city, and mid 20s on the highway. I do recall that running a couple bottles of injector cleaner through not long after the swap helped with my mileage and a minor cold start issue I was having.

Not sure about the jerkyness. Mine is completely smooth unless it's my fault. I have an Exedy clutch and it's pretty grabby.

well that car went away, but thing is i am putting two more RBs in my new kouki, and a friends S13 here in the next month (most likely)

so i guess i could tack on some more info th this thread, that or make a new one, maby that would be best.

*zerooath* · 04-28-2007, 05:08 PM

can you post pics of this car with the swap done?

and where in the world did you get your wiring done?

Tenchuu · 04-29-2007, 01:26 AM

Quote:

Originally Posted by zerooath

can you post pics of this car with the swap done?

and where in the world did you get your wiring done?

read every page of this post. all the answers are within.

and jsut for fun the new prepped RB goodness

moonshinekouki · 05-12-2007, 12:45 AM

how about ur tach how did u get them to read accuceatly teh revs and speedo?
thanks
mikey

Tenchuu · 05-19-2007, 09:51 AM

Quote:

Originally Posted by moonshinekouki

how about ur tach how did u get them to read accuceatly teh revs and speedo?
thanks
mikey

speedo read fine, the tach needed to be recal. you can adjust it with a screw on the back of the S14 gauge, but you have to have something to adjust it to to make sure it is 100% acurate

nissanguy13 · 05-27-2007, 01:43 AM

did you figure out what the hell that big metal chunk on your firewall was? I saw one of the earlier posts on this thread, you must of been talking about my bad ass sr?

Tenchuu · 05-27-2007, 10:18 PM

maby......

here are some pics of the new swap..

nissanguy13 · 05-29-2007, 02:46 AM

Hopefully one of these days well be in the same area so I can see this damn project. Since you took off with the other one before I got back

Tenchuu · 05-30-2007, 09:48 PM

woot woot for the smaller intercooler

kouki_s14 · 05-30-2007, 10:04 PM

ahh brings back memories doesnt it?
although it might be some rather bad ones, but still memories haha

liv2drift045 · 05-30-2007, 10:32 PM

git-r-done
msglnghtstfundai

Tenchuu · 06-15-2007, 12:50 AM

all front wiring done and tucked away. most of the piping of the intercooler finished. take a look:

and my 7MGTE sitting around:

kouki_s14 · 06-15-2007, 04:49 AM

you really do like those expensive ass radiator hoses dont you? haha

Tenchuu · 06-15-2007, 11:50 AM

Quote:

Originally Posted by kouki_s14

you really do like those expensive ass radiator hoses dont you? haha

not really, but i have read other ways to do it,but all of them involve splicing hoses, and i still want to see it work in person.

and that one was only about $40 + 2 min to install.

by the way, that intake is a beat up POS that came with my clip, i have one for it floating around somewhere buried in the garage that is new.

04-26-2006, 05:48 AM	#125
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	Nnnooooo!!!! __________________

04-28-2006, 07:36 AM	#132
R33GTS-T Zilvia Junkie Join Date: Apr 2005 Location: Here and There Age: 42 Posts: 313 Trader Rating: (0) Feedback Score: 0 reviews	personally i think you have so much time and money invested into this project it would be a damn shame to turn around and sell it....especially if you get it fixed up and running there's nothing like the sound of an RB25DET i'll never own another S chassis car w/o and RB in it.....hell even my girl is planning to build an RB25 powered zenki s14 during this coming off season __________________ does your wife drive a wide-bodied sr-powered coupe???

04-28-2006, 10:44 AM	#133
NemeGuero No more nissan. Join Date: Jan 2003 Location: RAIN, Washington. Age: 40 Posts: 8,132 Trader Rating: (10) Rides Gallery: NemeGuero Feedback Score: 10 reviews	Keep it! I'm sure Dave will give you a good/fair deal! __________________

05-12-2007, 12:45 AM	#140
moonshinekouki Zilvia Junkie Join Date: Nov 2005 Location: Toronto Posts: 350 Trader Rating: (2) Feedback Score: 2 reviews	how about ur tach how did u get them to read accuceatly teh revs and speedo? thanks mikey __________________

05-30-2007, 10:32 PM	#147
liv2drift045 Zilvia FREAK! Join Date: Feb 2005 Location: Chicagoland Age: 42 Posts: 1,483 Trader Rating: (7) Rides Gallery: liv2drift045 Feedback Score: 7 reviews	git-r-done msglnghtstfundai __________________ StreetSliders.Blogspot.com

04-25-2006, 10:16 PM	#124
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	car is messed up i have to move. this makes me sick to do it... http://www.zilvia.net/f/showthread.p...877#post982877

04-26-2006, 09:21 AM	#127
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	copied and pasted from the for sale thread the why on the sell: I am quitting the millitairy and moveing on monday (may 1) Moveing to Oregon witch lacks a shop for me to cheaply work on it car currently barley runs and sounds like a lawnmower i still have to pack up, move out to another place and clean up my place before monday (currently 1/2 way packed) I don't have little if any mechanic troubleshooting skills to figure this out, i don't have the cash to pay a mechanic to do this as well as keep full coverage (have to since have loan on car), pay the car payments, pay off the loan for the swap and pay the credit card off for the swap AND buy another vehicle to drive in the mean time while this is down cause i am going to be unemployed for a couple of months while i relocate. so current bills+mechanic bills+second car payments+moveing-my job=need a reliable vehicle.

04-26-2006, 09:27 AM	#128
Neejay Post Whore! Join Date: Jan 2004 Location: lol Age: 39 Posts: 2,586 Trader Rating: (2) Rides Gallery: Neejay Feedback Score: 2 reviews	Damn...sorry to hear.

04-26-2006, 11:05 AM	#129
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	well it's oficial #5 cyl is flatlined.

04-28-2006, 07:23 AM	#131
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	well as of now the whole car is going to drift freaq to go to (syko performance) for repairs, i could just pay for the repairs and keep it......or sell it running guess it is all up to me to sell shit and raise funds to keep it or toss in the towel and call it a day on the 98RB project. will be deciding soon.

04-28-2006, 01:11 PM	#134
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	dave and gary are great guys, that is why i trust them with the car adn that they are going to do an A+++ job on it. thing is my priorities ar kinda shifting and funding is tight. and if i keep it i will have to go back down to LA from OR then drive back up to OR again with the gas price at $my left nut/gallon

05-05-2006, 12:08 AM	#135
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	OK car is running fine and has a new longblock in it. altho i am not going to be around to see it, it is going to be sold here soon. this is the end of the RB swap for me. swap was a complete sucess, reliability was a complete failure for me. obviously this isn't the normal as henery and alot of people have perfectly running RB cars that give no problem, but if anyne attempt to do this in the future, i would suggest haveing 2x the needed funds for misc items that don't work, but top of the line shit the first time, and be prepared to buy a new engine or completely go through it the first time. i learned the lessons everything expensive way. but now with the new motor, a qualified mechanic is going over it, and i will be running fine, and i will never have to see that car ever again. and after all the work and money i put into it i have to say that might be a good thing.

04-28-2007, 05:08 PM	#138
zerooath 98 Kouki Slicktop. Tip Dealer! Join Date: Nov 2006 Location: Biloxi, Mississippi! Age: 36 Posts: 359 Trader Rating: (0) Feedback Score: 0 reviews	can you post pics of this car with the swap done? and where in the world did you get your wiring done?

05-27-2007, 10:18 PM	#143
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	maby...... here are some pics of the new swap..

05-30-2007, 09:48 PM	#145
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	woot woot for the smaller intercooler

05-30-2007, 10:04 PM	#146
kouki_s14 Zilvia FREAK! Join Date: Jan 2004 Location: Los Angeles Posts: 1,550 Trader Rating: (0) Feedback Score: 0 reviews	ahh brings back memories doesnt it? although it might be some rather bad ones, but still memories haha

06-15-2007, 12:50 AM	#148
Tenchuu Post Whore! Join Date: Apr 2004 Location: Oregon Age: 42 Posts: 2,474 Trader Rating: (8) Rides Gallery: Tenchuu Feedback Score: 8 reviews	all front wiring done and tucked away. most of the piping of the intercooler finished. take a look: and my 7MGTE sitting around:

06-15-2007, 04:49 AM	#149
kouki_s14 Zilvia FREAK! Join Date: Jan 2004 Location: Los Angeles Posts: 1,550 Trader Rating: (0) Feedback Score: 0 reviews	you really do like those expensive ass radiator hoses dont you? haha