Help! R32 caliper - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Laujpha · 07-17-2017, 08:07 PM

Can someone help!!!!!!I recently bought a set of front caliper to do a big brake conversion on my s13. The caliper i got was from a r32...the caliper are aluminium and i need to buy some rotor but sure if the caliper are 26mm or 30mm.. i did a measure of the gap where the rotor sit in it and it's like 1 3/8 about 2inch off from being 1 1/2. The guy that i bought it from say that 300zx rotor fit but i just want to verify before i buy the rotor.

07-17-2017, 08:07 PM	#1
Laujpha Join Date: Dec 2016 Location: California Age: 36 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	Help! R32 caliper Can someone help!!!!!!I recently bought a set of front caliper to do a big brake conversion on my s13. The caliper i got was from a r32...the caliper are aluminium and i need to buy some rotor but sure if the caliper are 26mm or 30mm.. i did a measure of the gap where the rotor sit in it and it's like 1 3/8 about 2inch off from being 1 1/2. The guy that i bought it from say that 300zx rotor fit but i just want to verify before i buy the rotor.