![]() |
|
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Nissanaholic!
![]() Join Date: Mar 2003
Location: *Nine -1- Six*
Posts: 1,934
Trader Rating: (1)
![]() ![]() Feedback Score: 1 reviews
|
![]() i juss put on some 17x8 235/45/17 in the front adn 17x9 255/45/17 in the rear..they are nismo LM gt2 and some how the driver side..the whole entire side..is more flushed and then the passenger side..the tires stick out soo much on that side that rub making a left U turn, but when i make a right U turn its fine..dunno whats wrong with it..limmie know thanx!
__________________
-Cherry Red 91 Silfourty- ![]() |
![]() |
![]() |
Sponsored Links |
![]() |
#3 |
Nissanaholic!
![]() Join Date: May 2003
Location: Orange Park, FL
Posts: 1,666
Trader Rating: (0)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 0 reviews
|
Have you had it aligned, or can you at least eyeball the camber...that could be your issue.
Too little camber on the one side will make the wheels look like they're sticking out more. But we need pics to help determine that. - Brian
__________________
www.KA24DEvelopment.com |
![]() |
![]() |
![]() |
#4 |
Zilvia FREAK!
![]() Join Date: Dec 2002
Location: garage
Age: 42
Posts: 1,215
Trader Rating: (2)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 2 reviews
|
do the camber
mabie the car was hit mabie a quarter was replaced mabie the chassis is tweaked subframe could be offset a little Ive seen this many times not so uncommon on s13, no big deal |
![]() |
![]() |
![]() |
#5 |
Nissanaholic!
![]() Join Date: Mar 2003
Location: *Nine -1- Six*
Posts: 1,934
Trader Rating: (1)
![]() ![]() Feedback Score: 1 reviews
|
lol ive gotten this car alinged many times this year..i dunno its pretty odd, i'll get some pics. whats werid it only shows on these 17s
__________________
-Cherry Red 91 Silfourty- ![]() |
![]() |
![]() |
![]() |
#6 | |
Nissanaholic!
![]() Join Date: Jul 2003
Location: DC and Norfolk VA
Age: 39
Posts: 1,650
Trader Rating: (2)
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Feedback Score: 2 reviews
|
Dont trust techs that you dont know. LOTS of techs and tuners alike are low lifes that will try to screw u over for money. When i worked at Merchants, the cars that we couldn't get right, we would cheat the machine. Is your frame slightly bent at all? Mine has been in slight accidents before so i always have trouble with my alignment. I can tell by the camber plates lol. Check your camber first. Take a meter or yard stick and put it against the wheel and look at its slope.
__________________
HouseBuyers365.com Quote:
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|