Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-08-2007, 11:28 AM   #1
RpSinner
Zilvia Member
 
Join Date: Apr 2004
Location: SF bay area
Posts: 277
Trader Rating: (0)
RpSinner is an unknown quantity at this point
Feedback Score: 0 reviews
SR sr20det vaccum line help AGAIN

just did a swap but im having problems getting any power while in boost. i can drive around ok under 4k just not in boost. i know i am boosting because the bov is going off. however while boosting i hear the bov hissing so i think im leaking boost. i swapped bov's but that did nothing. i checked my vaccum lines and they are fine.

i have a greddy intake manifold and a stock throttle body. i did some searching and people have said the bov vaccum line should go to the top left nipple on the throttle body but i do not have any nipples above my throttle body. WHY!? instead i ran the vaccum line to the nipple on the bottom. from there it runs accross the motor and i have a T with one line to the wastegate actuator and one to the bov. i tryed running the vaccum line to one of the three nipples underneath the intake manifold but that didnt do anything for me either.


can anybody help?! i want power!
RpSinner is offline   Reply With Quote
Sponsored Links
 

Bookmarks



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net