some advice and or suggestion - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

rsam240sx · 08-30-2007, 11:18 AM

My 240 (1995) has been lowered, not slammed by any means mostly becuse it is my daily car. The car has been lowered using a strut and spring combo (sportlines and agx), lowering the car 2 - 1.75 inches. Now to get the proper align done is the drop within the limitation of the stock suspension components or do I have to get the adjustable components (TC rods, traction link arms, rear upper control arm, toe link arms) do get it aligned properly? I was planning on replace all of the stock bushings before getting an alignment done but not if I require all of these adjustable components.

IF someone with this setup can let me know if they required adjustable components to get the car aligned properly.

TIA.......... any advice would be greatly appreciated.

Rick

08-30-2007, 11:18 AM	#1
rsam240sx Join Date: Apr 2005 Location: Toronto Posts: 9 Trader Rating: (0) Feedback Score: 0 reviews	some advice and or suggestion My 240 (1995) has been lowered, not slammed by any means mostly becuse it is my daily car. The car has been lowered using a strut and spring combo (sportlines and agx), lowering the car 2 - 1.75 inches. Now to get the proper align done is the drop within the limitation of the stock suspension components or do I have to get the adjustable components (TC rods, traction link arms, rear upper control arm, toe link arms) do get it aligned properly? I was planning on replace all of the stock bushings before getting an alignment done but not if I require all of these adjustable components. IF someone with this setup can let me know if they required adjustable components to get the car aligned properly. TIA.......... any advice would be greatly appreciated. Rick